Search results

Freaking amazing what a 4ft pipe can do! I held the engine with one hand and pushed down on the pipe with the other. It came right off in seconds.

Sounds like turbo seals are bad. Have it rebuild before it makes a real mess. Trust me its no fun.

R154?

I don't think single turbo will matter. Something is wrong. The twins should give you good acceleration.

Went shopping and ordered from Toyota a water pump, oil pump, bell housing, gasket set. Also have a fidanza flywheel and act xtreme clutch kit coming new injector and coil pack clips. Should be all I need to get the engine in the car. Off to the hardware store to buy a 4ft pipe to hopefully...

You forgot to push the clutch in! Maybe they thought you wanted to shave the car and not the moldings? You want to keep the moldings, but just smooth them out. Right. I have heard that the doors especially will do that with the pounding over time.

Here are some good sites for those of you that need to repair some of your harness plugs. First the part numbers This is a good right up from supraforums.com http://www.supraforums.com/forum/showthread.php?471576-Wiring-Loom-Repair Next is a good site to buy all the plugs you might need...

Read this, lot of good info. http://www.supramania.com/forums/showthread.php?63998-2jzge-T-swap-notes-and-pricelists

Ahhhh I see the difference. Thanks guy yall have been very helpful.

This might help some only he slapped a turbo on it. http://www.supramania.com/forums/showthread.php?63998-2jzge-T-swap-notes-and-pricelists

this one? These are the injector clips i am talking about. http://store.driftmotion.com/static/i-densobottomslotconnectorf2.php http://store.driftmotion.com/static/i-densotopslotconnectorf1.php

Damn, ill be back......... On a separate note what Injectors clips do aristos use? I have seen f1 and f2 clips both are for 2jzgte

Yeah, for sure but I'm going for a clean engine bay and opted to get rid of the abs.

I'm thinking dimmer switch. I burned one those up, and had to bypass it.

Can't help you if you don't answer the question.

I'm glad I don't have pps, and deleted my abs.

What works and what doesn't.

Always read stickies. Lots of info in them. http://www.supramania.com/forums/forumdisplay.php?30-Other-Engine-Tech-(1JZ-GTE-2JZ-GTE-Etc)

Well I've done all I can do for now with the harness. I'll have to drop the engine in in order to see how much wire I will need for the body harness plugs. I have tore down the hot side, have to get the block cleaned up and painted, before I slap the new gaskets on. I'm having a hell of a time...

I'm going aristo. Ok to make sure I get this staight. The B1#13 to the E10#34 then run the black and white from the from the A/C compressor to the blue wire next to the battery fuse box. Is this the plug?