Search results

What does T.S.R.M. stand for?? Toyota Supra Repair Manual? Toyota Shop Repair Manual? The Shop Repair Manual? The Stupid Repair Man? Where's the link for it? I had it at one time, but I bought the four inch thick paper back version for $80.00 instead Is it the same??

I just did a boost gauge in stall in my gauge cluster. I haven't installed it in my car yet, before I do I need to know one thing: Since the old gauge is not there any more, do I need to have the terminals attached to the mylar circut board for the rest of the cluster to work or to complete any...

I'm looking for the write up for changing the l.e.d."s for the gauge cluster?? YES I searched>

Boost gauge install and yes the mylar circut works!

I'm would like to hook up the head light washers for my "90" as you guys know, it didn't come with it. I would like to hook it up so that it only works when the head lights are up,..or when the head lights are on, If I hook it up only when the head lights are in the "up" position,will there...

I'm trying to hook up the lights for a boost gauge and The instructions calls for a hot wire for the dial light to be hooked up to the ignition ,but I don't want that, I want the light to turn on when I turn the dash light, from the headlight switch, can I hook it up to rheostat? Where is the...

What is the voltage for the L.E.D's for the heater controls? I'm trying to change the L.E.D. to blue

On the back of the cluster guage, I see that there are several terminals where it says ingtion+, I thinkt here are at least six place where I see that. Is that the same as tapping into the fuse block for direct ingition source?? I'd like to hook up an boost guage, but it needs an ignition...

What did you guys send on your Supra, not counting cosmetic? I mean, parts only, just to get it running or mods

Sure as hell can't wait un till I get my supra done I'm alomst done with the drive train and cant wait for the day It goes to the body shop

Hey you guys and gals How do you drop the steering wheel?? I'd like to get the dash out, I'ts loose, I just cant get the dash without hassling with the steering colum It will scuff the steering if I try to wresle it out, I shouldn't have to force it out, or I'm I missing a step.

Where do you place your vacccum "T' for the boost guage? I'm running a "XS" Turbo dual stage boost control. A) between the turbo and the boost control B) between the first stage and the second stage of the boost control C) after the boost controller and before the actuator? D) None...

It sounds like alot of people is a big fan of Maft pro products. From what I've read on this forum alot of people are using Maft pro,but then again, it sounds like a lot of people are having trouble. I have an old school H.K.S. F Con preprogramed R.O.M. with a G.C.C., how I understand it it only...

I'm only looking to get 400 h.p. for my ride. Here's my mods: 57 trim turbo Lexus a.f.m. with 550 injectors 3" exhaust and "Lipp" elbow "XS" Power" Dual stage boost control H.K.S. F com preprogrammed R.O.M. 550 chip and G.C.C. I have to run the stock a.f.m. for smog reason's I'm...

How do you guys/gals fuse two Supra 3000 pipes together?? I know,... cut and weld right?? it even if you do you still have to grind and polish the welds to make it smooth or I'm I totally off on the procedure? I know, H.K.S. has one already made, I'm picky I want it to say "3000"

After all this time I thought the J tube was the tube comming from the turbo to the block and also the water intake I guess I'm confused abouthe by passing the j tube or drilling it out please help me out and explain , please!! Signed: don't know sqaut about "j" tubes"

Dose ant one know to remove the corner turn signal lense from the turn signal housing, is seems like it's glued on or something, yes I already got the screws in the center on the back side and I know there are tabs on the edges, what else is left?? It feels like I'm gonna break something,...Do...

Has anyone ran both the H.K.S. and then ran Maft Pro?? all I've been reading here is maft Pro this, Maft pro that, so, I guess maft Pro must be the "one", Is H.K.S. in the dark ages?? God, I hope I'll be alright with my old dinasour ( I know I cant spell) F con, with g.c.c.??? Is Maft pro a day/...

I cant remember where I read this It was either here or I think the Supra forums. I was reading some write up where it said The more clip the faster the spool but you'll have less,...something____.... less boost?? The less clip you have you'll slower spool but more____ boost??Please help...

Is it just me???? Why can't get on Supra forums are they having trouble with there web site??? It won't load up and I cant get there home page