Search results

I know i've seen huge threads on this before but I can't find anything with the search (sorry!) I am wanting to put an 89+ bumper on my 87 turbo, do I just need the bumper as it will bolt right up? Or is there mounting brackets underneath I need... and will my stock '87 header panel work...

Where can I find one of these? They are only available to buy when you purchase a wideband? 'cause i'm still on the stock o2 sensor and was wanting to use a PDA to log knock count, rpm, etc. I searched and found nothing :cry: Edit: I finally found something on sf that our ECU doesn't output any...

89+ will not work on pre89s :) they don't sit flush on the car.

So the CSI is something that can just be pulled out and inspected without having to replace any seals/ring? And how does one clean his cold-start injector?

How long did it take to get it in the mail once you paid for it?

thanks! :)

I can't for the life of me find the write up on how to put a dsm bpv on the 7mgte. I think I have a leaky bpv and I have a dsm one handy that I want to try and put on while the car is getting the other stuff done to it. I know they don't like ~18psi or more very well, I won't be running that...

Bump. Are the ignition wires long enough on the harness to pull it out some to work with it when I put on my turbo timer harness?

bump :]

I should've just removed that before I posted. I got that off, just can't get my hand in there enough to unplug the harness and plug in the tt harness inbetween. I ran out of time for it tonight so i'll have to finish it some other time. Are the wires long enough on the harness to pull it out...

I'm doing my turbo timer finally and was wondering how to get to the harness coming off of the ignition switch. I searched and somehow found nothing. I know, silly question. I thought i'd ask before I take things apart I don't need to. Thanks in advance!

Thanks :)

I'll take a look at the part number, but my car is an '87 turbo targa 5 speed. I'm just replacing the passenger side headlight motor due to it going out. I was looking on ebay for some and thought I would make sure they have the same harness. Thanks for the help.

bump?

Is the harness for the headlight motors the same on -89 and +89? I searched and didn't find an answer. Thanks in advance.

All the steps to get it to work.

Anyone know where the writeup for the 1g DSM bpv on the mkIII is? I've searched up and down on sf and here cannot find it. Thanks.

So to those who have made custom boxes, how much space is between the spare cover and the targa holders?

I believe stock 1/4 time with a good driver is 14.9 (brand new) so expect low 15's as a good driver.