Search results

Yeah it works and dampens a little sooner but since I had my fidanza installed its not a bad thing and its less than a full turn. The idle speed is controlled automatically anywayz after the baseline adjustments. I just tweek mine cause its 120+ over here right now and when sitting at idle I...

When you say your adjusting the TPS you mean your loosening the two screws and moving the TPS itself? The way I adjust mine is as follows. Get to operating temp and then disconnect the throttle linkage to the throttle body. I check the RPM with the dashpot adjustment all the way backed off...

Ive had at least 2 AFM's go out and they both caused black smoke to spew out the back, one had the circuit board delaminate and the other had the flapper door stick. The flapper door is easy enough to check. The one that delaminated would keep dying while idling but would start again.

I also have a set of pacesetter headers. I had it modified to a 2.5 and dumped the y that came with it. Also had the oxygen sensor piece welded flat to the pipe so the sensor would be in the exhaust stream more and not masked. The shop had to modify the flange for it to mate to the head, the...

I go flat out in mine a few times a week and I can barely get it past 5000 rpm in 5th. Ive got a run of about 5K to the base where I work after I go through a secure monitered area and I agree that the NA doesn't have enough balls. Ive had mine for about 10 years, been through 3 motors 2...