Search results

  1. M

    Merlyn's 91 GTE Build?

    Well, I am not sure the material you used, but I used this on just standard fabric to test it, a white t-shirt and it physically dyed the fabric. This stuff was developed for couches, chairs, tshirts, ect ect it then was found to work on automobile fabric as well.
  2. M

    Clutch wear, can it cause this?

    I beg to differ on that whole idea that your can't somewhat fry a clutch... I had to replace my transmission in my Maxima but the clutch itself was shot (we saw it out of the transmission) and I could sit there and shift and the RPMs would raise much faster then normal (well a tad faster, if...
  3. M

    Merlyn's 91 GTE Build?

    Ok... after taking picture I realized I have to go back over some spots, mostly when they are hit with direct light you see the "red" under them...
  4. M

    Merlyn's 91 GTE Build?

    So far I have had to go back and touch up a few areas, in certain light I "think" I see some red left, but then it disappears at another angle. Long story short, they are black and unless someone really starts to look, and even then I am not sure if they could tell the difference.
  5. M

    TurboFreaks Build thread? What?!?!

    Turbo what are you freaking out about... IF YOU WOULD GET THE FLYING F DOWN TO MY HOUSE I HAVE A GTE AND GE BLOCK WAITING TO BE PICKED UP... and AF... how dare you not comment on the seats YOU sold me :( makes me sad... they look are purty now and you didn't even look :( Freak... want your car...
  6. M

    I guess I should introduce myself.....

    We need pictures, congratz on the find, but:ttiwwp: sorry, had to do it, best of luck on that
  7. M

    Shifting with out a clutch?

    I find it amazing, how people are now proving their ability to drive by not using parts that were designed for just that... . yea I am soo cool I don't need a clutch, I can match my RPMs to drive... i did it once in my transmission just to see, and honestly it took me longer then just normal...
  8. M

    Britain's Got Talent -Another Reality Show..

    Wow... that girl was amazing.... just amazing
  9. M

    Car starts on CSI but wont hold

    Sorry for getting frustrated... I just spoke to my mechanic I asked him about his diagnostics ect and they were legit (fired an injector with readings of fuel pressure, fuel pressure went down when the injector "fired") I told him there is no use looking for other problems until code 14...
  10. M

    Oh Man Oh Man Ohhh.... WCM Ultralite

    and it has VTAK OMGOOGLES........... no seriously nice car
  11. M

    Merlyn's 91 GTE Build?

    Yea, 16 cans of fabric dye works wonders (took 6 cans on the black seat) so 10 left to work in the driver seat, then deciding what to do with my back seats.
  12. M

    Car starts on CSI but wont hold

    the noid light was one of the first tests we did, I stated in my first post, I forgot some of the diagnostics we ran, and yes, I plan to clear code 14, leave it at that, my mechanic asked that I ask one question on here, I put as much detail as i could to get answers "What would cause an...
  13. M

    Face to names

    There is me... and here is one of my ex gf and I
  14. M

    Merlyn's 91 GTE Build?

    Well Cars gay... here is a video of the seats though, they rock... this video is much better as it is outside, so you actually can tell the difference. http://blaisebox.ath.cx/Video/seats.wmv
  15. M

    Car starts on CSI but wont hold

    as stated... 14 just came back... all the other tests were run before 14 came back, 14 came back just today...
  16. M

    Car starts on CSI but wont hold

    I understand the aspect of code 14... but aside from code 14, because we have had this problem before without code 14, so I highly doubt the problem is related to code 14 as the symptoms have been the same from day one.. is there anything else you can think of I know code 14 would cause it not...
  17. M

    Car starts on CSI but wont hold

    Code 14... the car is starting... for a few seconds... like the minute it actually starts to fire he dies... gets to about 1500 and as fast as it gets to 1500 it dies... we have oil burning out the tail pipe (bad turbo) the car is pushing fuel through itself... I had code 14 before, when I...
  18. M

    Car starts on CSI but wont hold

    I was not there for the test on the injectors (the car is at my mechanics I stop by once a week and we work on it for a few hours) I was however told the injectors are not firing, they can be manually fired, but they are not being pulsed to fire. Simply, these tests I was there for should...
  19. M

    Car starts on CSI but wont hold

    Ok, this is not the normal, OMG I came home from work and it won't start, where do I start looking for problems... this is more like, I have 2 mechanics and myself, and we are running out of options and we need help So far we have replaced ECU Bad CPS Bad Coil Pack We Know Fuel...
  20. M

    i found out my family tree...

    so your crazy mixed with scared... (german / french) ok... I am done... not funny