Search results

supradreampdr let me know asap how the clutch kit is holdin and does it feel like stock .....i plan to get the clutch and flywheel from them..... i talked to xtd and they said it has 2300pds of clamping load .......i belive the stock one is like 1800 correct me if im wrong guys......

you should check a small hose that goes from the head to the thermostat housing its a 90 degree hose thats about 4-5 inches in length ....that thing blew up on me ....it a pain to replace check it out and let us know.....

Is anybody using the south bend clutches from suprasport they have one that holds 520 tq for $430....

im looking for a turbo too....does anybody know if an upgraded ct26 with a 57 trim and a 10 degree clip is capable of 400whp or more

i want to know if u guys think this cluctch is good for a 350-400whp ....its an xtd stage 3 the pressure plate is the upgraded stock one to 2300 pds of clamping load and a 6 puck sprung copper ceramic , throw out bearing and pibot, and aligment tool for about 240 dlls and they also have a stage...

Aaron.....so if i order mk4 tt motor mounts they work with my 89 supra and all i have to do is cut he nipple on the botton no other mods....

Is anybody using this flywheel or recomend this type of steel... i came across it on ebay its about 230 shipped...has the same weight as the Fidanza and this one is steel.....

I got a jdm engine and went hks 1.2 and arp head bolts, since the engine was already out the rear main seal. water pump, cam seals, timing belt kit, and all the stuff that u can replace that will later be a pain to get to......good luck

I seen your car in Iraq....I just got back March 6.....by the way I'm a Marine... nice car...good luck with it...

I just replaced the a/c coolant sensor switch on my 89mk3 and that made my gauge work ....its 14 dollars at auto zone...i got mine done about 1 hour ago...good luck

I just picked up the new issue of Sport Compact and there it was ...a white mk3....anybody seen this one.....it is on the 7mpower website ...

HOw about the Precision Turbo and Engine 550cc (PTE's), anybody run them... Or how about Nippon DEnso 550's just trying to see what people are running on their engines .....

Has anybody ran these injector?If so any problems....im about to buy some 550s i saw them for 320 on ebay or should i ge the 550cc ptes for 350?

What Year Of Mr2 Turbo/na Does The Alternator Swap With The Mk3? THE MK3 IS 80 AMP AND THE MRS IS 100AMPS? Direct Bolt On Or Whats The Deal, Mine Has A Loud Squeaking Noise And When Use My Blinker All The Dash Lights Blink Too Any Ideas What This Might Be IT Has A New Battery..

you should get the cooleeze hard intercooler pipes for about 400 and aaron at drift motion is selling the sparco replicas for about 225 it should be good if you are not going to go over 500 hp.....im getting this setup next week by the way check out jblmk3.com he is making about 420rwhp on...