Search results

Can the speedo cable be making my car idol at 2100 rpm. The codes i have are 42, 52, and 53. I read some where that the vechile speed sensor is in the speed cable. My car just started doing this and the speed cable has not worked for about 2 months. Any ideas

my car just out of the blue today started to idol really high like 2k. It had been idling fine ever sense i replace the throttle cable (900rpm) and just started doing it. I can not figure it out i have tried everything i can think of. I looked for any loose connections, throttle, re adjusted the...

Alright up until friday my car has never had a problem starting at all ever. And some how out of the blue it just has a really really hard time starting. I turn it over and it tries really hard to start but will not kick over. After trying for a long time it will start but only if i give it gas...

MSD 6AL, PN 6420 The 6AL delivers everything the 6A does with the addition of a built-in Soft Touch Rev Control. This feature allows you to set an rpm limit to protect the engine from over-rev damage caused by driveline failure or missed shifts. Other MSD RPM Controls can be connected to the 6AL...

alright her is the deal this weekend i started to work on my car because it started to run worse. I had seven codes. The reason i looked into it was because until the car got all the way warmed up when i would hit boost in any gear it would jerk back and forth until the right rpm then it would...

alright i upgraded from the sealed beam head lights to some projectors i got and they came with some light bulbs but after trying to drive in the dark and see i noticed well they completly suck.. so i got rid of those and got some silvania ultra white bulbs best ones checker had for my car. Now...

alright so i rebuilt my 7mgte and installed it. It does run and everything is hooked up in the right place all the vac lines are hooked up. So my question is what would be wrong if when i try to accelrate the rpms drop off and i cant go over 2500 rpms in first and all gears and can only go about...

Hey i got the arp head stud kit and need to know what they need to be torqued down to exactly the box has 3 different options for the 7/16 stud they are 53ftlbs, 60 or 63ftlbs, and 70ftlbs. Can anyone help i need to know asap

Alright my orginal plan was to buy a jdm engine but after hearing some bad things about them i decided to rebuild. So i am going to be putting the enging back together this week. I have probe .040 orver pistons eagle rods, new oil pump from drift motion, hks metal hg, new gaskets. I got the...

Has anyone used one on there car what was the outcome. I Bought one and then i was told they are shit and should not put it on becasuse it will add tension or something on the bearings?? Will i be safe to use it and not have problems or what should i do