Recent content by teamslow

I found the answer. Stock diameter is 60mm. Rc engineering throttle diameter is 65mm.

Does anyone know the stock throttle body diameter. I have a throttle body that has been rebored by RC engineering. I just wanted to know how much bigger it is compared to stock.

Let your Dad buy the GLK. You'll save yourself and your Dad a lot of headache in the long run. Most wear items can be bought at your local automotive parts store. Lots of the dealership items are discountinued. A good site to buy factory and aftermarket stuff is on driftmotion.com. If you cant...

On your youtube video, you posted 482rwhp and 391rwtq at 17psi. Also, there is a 67mm turbo dyno thread on supraforums and everyone on pump gas made between 470 to 510 rwhp. So I think my numbers are decent. When my tuner told me I made 525rwhp, I told him to stop there because I was more than...

7m-gte, precision 6765 journal bearing turbo.81A/R 18 psi on pumped gas, JE pistons, Crower rods, port and polish head, 1mm oversized ferrea valves, ATI crank pulley, sethron long runner FFIM w/ 90mm TB, 24x12x4 intercooler w/ 3" piping on cold and side and 2.5" piping on hot side, 3" downpipe...

What day is the meet?

Sorry, I dont have pics of it installed. The only pictures I have is when I was asking the same question as you. http://www.supramania.com/forums/showthread.php?124454-Teamslow-s-7m-SuperStreet-Build/page2 But the piece I think you're missing looks like this...

I had the same problem before. You have to either buy the entire push pull converter kit or you can ask Randy from BICperformance to make you a custom one. I tried calling local distributors of OS Giken. I even called OS Giken directly. And no one wanted to sell me just that one piece.

I have a bunch of rare parts on my car. But probably the most rare part on my car is my cfx front bumper. And my SD drop down bracket.

Oh wow. I guess the shop I took my car to was telling the truth when he said the quote he gave me was cheap. The shop that painted my car quoted me $2500 including a new left fender. Pearl white Tri-coat paint job. They removed and reinstalled all the glass and trim. fixed the rust. fixed the...

I see my thread is back from the dead. I've read alot of people complaining about the aftermarket slave on the spec leaking among other things. I ended up buying the OS giken twin disk instead of the spec twin disk. No regrets at all. I dont remember the weight. But I can say I know it wasn't...

You can buy a cheap manual boost controller off ebay or make your own. I'm sure you can afford $20 dollars. If it does not hold boost with the boost controller then you may have a bad wastegate. If that is not the issue then you need to do a boost leak test.

get an OS Giken twin disk clutch.

I've worked at pepboys and a couple of dealerships as a mechanic in the past. Most places only adjust the front toe. Sometimes you'll get lucky and have a guy adjust the camber as well. My 4 years of working in different shops, I've never seen anyone adjust caster.

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=LU&P=7