Recent content by supbrah86.5

Goood info so far everybody. Seems like im going to keep the calipers and probably freshen them up a bit. I agree with the good thoughts on the oem calipers, when I put pads and rotors(autozone) i was actually pretty impressed considering they were all duralast and probably filthy fluid as well...

Hello! What are you fellas doing for brakes? I have an 86.5 with a 1jz and it goes pretty quick and actually doesnt stop too bad but i have a horribly warped oem rotor and want to upgrade, if not all four sides, at least the fronts. I saw that some people upgrade to nissan 4 pots(need more...

Yep only one cap. Where do you get te right caps from? Clearly not radio shack. Is this definitely the issue?

Welp soldered in another capacitor and same issue. Gonna swap cylinder six injector with cyl 1 see if the issue follows

Looks like you're exactly right on this one. Going to solder a new one from a spare ECM and let you know. Good call sir!

So after a few months of running great, a developed a dead miss while driving home. So far what I've found is a dead miss on cylinder 2 and 6 which share the same signal from the ecu. I've swapped coils and plugs and the number 2 injector, the miss stays on 2 and 6. Additionally I overlaid the...

This is a huge thread and I suck but I have the mkIV TT wheels and as every one knows the rub the control arms and rear strut at time. I'm looking for a wide, yet clean flush stance. I'm running h and r race springs and bilstein hd struts. What size spacers did you use if you happen to use the...

Hey guys, I hate to post another help thread, I know all of you hate it but look: I bought a 1jzgte from tiger japan claiming that it was from an mk3 but with my meager auto experience, it might actually be a soarer 1jz(STILL NOT CERTAIN). It came with the ecu and harness, m/t R154 and of...

I'll keep looking then. I just need to grow a pair I guess. I just don't want to rush it. As far as the reservoir, it's an NA 86.5 supra so I dont have any 7mgte parts that might be useful. The reservoir I do have does need to be replaced. I have been looking at the fabbed one on Driftmotion. I...

Thanks for the feedback so far! Some more questions of course! to hvyman: Where are you saying to cut the hole? What should I worry about destroying behind? Also, could you or anyone be more specific on what all needs to be rewired? I'm actually having trouble figuring out what a few things...

So I'm new to this forum, so I'll do my best to not shit it up! I currently have an 86.5 and recently got a 1jz from an mk3 supra via Tigerjapan. To start, my opinion on tiger: They are very helpful with questions you might have with purchasing parts and whatnot from Japan through Canada...