Recent content by ssb360

  1. ssb360

    **How to wire a soarer 1JZ into MA70**

    third plug for the ignitor, has white/black wire and black/orange wire. what is it for?
  2. ssb360

    **How to wire a soarer 1JZ into MA70**

    having trouble with wiring up the M1 plug it says the i need the yellow from the IJ2 and red/blue from IJ1... i looked and looked but my IJ2 dosent have a yellow wire but has a brown/yellow. would trc be part of no wire in the plug of did the color of the wires change with the years like the...
  3. ssb360

    **How to wire a soarer 1JZ into MA70**

    is there a diffrence in the wiring with a TRC throttle body or is it the same?
  4. ssb360

    ecu and wiring

    alright so i have a 89+ auto jdm turbo ecu and harness with grey connectors. I am looking for 87-88 auto turbo ecu and harness with yellow connectors. i would like to see if someone would want to trade. thanks
  5. ssb360

    hey did u send the wiring harness i havent seen it or heard from u about it.

    hey did u send the wiring harness i havent seen it or heard from u about it.
  6. ssb360

    starts but wont start again

    just forgot to point the rotor.
  7. ssb360

    starts but wont start again

    never messed with the tps and the timming seems to be fine
  8. ssb360

    starts but wont start again

    so i had a bhg in my 91 and fixed it but then it stared a few times a high rpm and then died. i dont think that i have the right size of battery, the bet that we put in there was out of another car and had 570 cca. what is the right cca for the car and would that fix it?
  9. ssb360

    engine knock

    or could i have a bad rod?
  10. ssb360

    engine knock

    :1zhelp:so recently i picked up a 86.5 with 91 engine tranny and rear end. i drove it for a couple of days and i spun my rod bearings, i put new brearings in and checked the crank i started the car up and for about 20 mins then knocking again. i found water in my oil so i took off the head and...
  11. ssb360

    starting problem on 89

    if you want a easy way to have no alarm just unscrew the alarm switches in the doors and take the spring out so you dont have the alarm flick on when you shut your door. you can screw the switch back in to make it look like you still have an alarm.