Recent content by MPower

i know its been awhile but i have a little update on the build. after cleaning up the block and pistons i noticed that its .50 over with new piston and rigs. im almost to the point of putting it back together just waiting on more $$$

i think its more than the relay. the fact that i found 5 wires that were would connected to nothing would be a big problem. now the next thing is should i build the bottom end or just leave it stock?

i know its been awhile but the supra project is finally on the way. over the weekend i pulled the engine for first time for me. after i pulled the harnes threw the firewall i noticed that the harness has been cut and very poorly taped back i found wires going to nothing so im going to go with...

after reading the tsrm i think i need an ecu

made a jumper to pin 2 and still no power on 12 and 13. when i was under the car today just looking around i noticed that the block and oil pan are blue. does it coem this way stock? also i found a bad area from rust looks like ill be cutting and welding a new section when i was...

i just went out to check for 12v on the harness and this is what i have found out. 1. the ECU has 12v from pin#1 2. when i turn the key no power at all and the fuse is still good. is it safe to run a jumper from the batterie to pin#2 (igsw)on the ECU?

update new pics on progress. just stripped it and removed the glue im ready for a cage. i dont know how im goin to go about this yet(buying or building one) anyone want a honda engine? i have one h22 and a f20b

before i mod the engine i planned on doing the HG thank you for the help. i was thinking about doing the ct26 with the 57trim. i think it will a good rsponsive setup

checked fuses they are all good

made a jumper to run the test but no check engine light comes on. im going to charge the batterie because it died from the cold and ill try in the morning. the manual says when the keys is turned on the check engine light should come on. well mine doesnt...could it be a dead ecu?

when i turn the car over it doesnt bounce.

i dont have a pic of it but there isnt a resistor on mine i have a 88t

how much does the main relay(M4 90987-02004 056700-4810) cost i know if this is bad the car wont start. how can i test to see if its good or bad?

after reading up on the theft system i went out and made a jumper for pin#5 to pin#13 eliminating the theft system but it still wont start. at least one thing is out of the way. to scan the supra what kind of scanner do i need? i would bring it to a shop but its not that easy when it does...

hi im new to this forum and a new supra owner. i have purchased a 88 supra turbo with 140k for $800. at the moment it has no spark but turns over great. i havnt had a chance to even look at the car yet to see whats wrong because of a prelude project in the garage taking all the space. i...