Recent content by mp51998

Well you hit it on the head. They emailed and stated they should receive the order on the 27th and then will promptly forward it to me. So I figure about another week. At least I was able to get a reply and feel better. I appreciate everyone else's replys and the good advise. I will take steps...

I was curious if anyone on here has done business with these guys. Here's the link http://enduroautowerx.com/default.aspx. The reason I ask is because I ordered a set of BC valve springs and retainers and have not received them yet. I placed my order on the sixteenth(Sat.) and the following...

Thank you gentlemen. Mike

What are you guys using to cover them after welding? Are you just painting or powdercoating or anything else special? I have removed mine but wasnt going to weld anything because there were no cracks. I guess I will be adding the support that were mentioned in this thread. Mike

After getting the door open and inside panel off I couldnt see anything apparently wrong. At least nothing that jumped out at me. I believe it may have gotten gunked up from sitting outside for so long. I applied a liberal amount of whilte lithum grease to the linkage and will test it again when...

Thanks for your input guys. I did exactly what JJ suggested and was able to see which directions the linkages moved. After a few minutes of fumbling around with a wire hanger I was able to get the door open. I'll open it up later to see what the problem was but wanted to says thanks for the...

I searched but none of the previous issues apply.On my 91 I cant get the passenger door to unlock so I can open it. It has the engine removed so the harness is out but if I hook up a battery I can put the drivers side window down but not the pass. side. The electric lock/unlock wont work and if...

Nice little write up there. Once the Sup is running I have a new project. I think I'll try to modify a tranny like that. I was originally building a rockcrawling DD myself since I lived in PA when I started this truck but the need is just not there where I live now. Plus I'm always working so I...

Nice to see someone else do a wheeler. Its a shame they didn't offer trucks/4Runners stock with the 7M. I did my swap over three years ago and love it. I use the w56 tranny though w/a 5M bellhousing. Works well. I'm still running the 4.10 gears on 33's. From the pics it looks like your tires are...

Grin isnt the right word. My face hurts after sitting in it and dreaming

Bought my 91 in May of 02' Drove it for about 2 months and got the dreaded rod knock. Immediatly took it off the road and tore the motor down. Had money for a full rebuild w/mods but then moved to Texas and twice since then so money was spent. Cant wait till tax time though because she will be...

I have a 7MGTE powered 4wd pickup and have smoked my share of mustangs from a standstill. Love the looks on their faces when I leave 'em sitting. Nothin like smoking 33" tires. I have yet to run a 1/4 mile. Mike

Do I feel stupid. It would have helped I put some effort into it and scrolled down. The first page appears as gibberish but then further on is readable text. Thanks for putting up w/the slow person. Mike

You must have some software installed that I don't. I have tried to read this doc from two different computers (and one of them is new) with no luck. I will try again on my home PC when I get there in a couple of days. Meanwhile if someone knows what I need please let me know Thanks Mike

I keep trying to read up on going to MAF but everytime I try to read these links all I get is gibberish. :aigo: What do I need to download to read these? Thanks Mike