Recent content by MKThiiis

  1. MKThiiis

    Water Outlet / Thermo Housing wiring

    TYVM Sent from my SAMSUNG-SM-G870A using Tapatalk
  2. MKThiiis

    Water Outlet / Thermo Housing wiring

    1987 7mgte, a Yellow wire w/Black Stripe and Red dots has come loose from a connector near the Thermo Housing. I am unsure where this wire connects too. I would appreciate some help. Engine code 51 I have included two pics, on shows the wire in question all the way to the right hand...
  3. MKThiiis

    Timing questions while at TDC

    Yes, verified tdc at crank with long thin driver inserted in spark plug hole, Sent from my SAMSUNG-SM-G870A using Tapatalk
  4. MKThiiis

    Timing questions while at TDC

    Yes, def verified tdc @ crank, I will complete a leak down of cylinder 2 - 5 this morning, and report back. My cam gear match marks are aligned with back plate match marks, BUT my cam gears have been removed from the cams, and reinstalled with pin located in center hole. I have replaced...
  5. MKThiiis

    Timing questions while at TDC

    Yes, i know.. T Leak down test at TDC for cylinder 1/6 show wicked loss. On the intake side Sent from my SAMSUNG-SM-G870A using Tapatalk
  6. MKThiiis

    Timing questions while at TDC

    I've done exactly this, but am having compression loss in 1st and 6th cylinder at TDC. I am leaking on the intake side, leading me to think my cam needs adj, Any suggestions? Sent from my SAMSUNG-SM-G870A using Tapatalk
  7. MKThiiis

    stock cam gear adjust-ability

    In the first pic it appears that the pins are in thw cent holes, but the close up shows a pin at 3 o'clock, Could you please help me with which is correct at TDC? Sent from my SAMSUNG-SM-G870A using Tapatalk
  8. MKThiiis

    Flying out to pick up my New (to me) Mark III

    @old radar thanks again! the shift knob is looking much better. question - what was the process to clean up your wheels? they look great on your photo bucket page.
  9. MKThiiis

    Flying out to pick up my New (to me) Mark III

    @old Radar , Thanks! i am about to make a cup of coffee and look into doing just this.
  10. MKThiiis

    Flying out to pick up my New (to me) Mark III

    Thanks! will do.
  11. MKThiiis

    Flying out to pick up my New (to me) Mark III

    just over 100k miles i have read about the need for a (HKS) head gasket and Bolts (with correct torq). any other recommendations?
  12. MKThiiis

    Flying out to pick up my New (to me) Mark III

    yes its very clean. I am stoked to make it shine. check out the interior http://postimg.org/image/45dx440jj/
  13. MKThiiis

    Flying out to pick up my New (to me) Mark III

    7MGTE - extremely Stock. Family owned since 1989. Garage Kept and well maintained. See you on the road. http://postimg.org/image/haav4zcij/