Recent content by MaxBoostedSupra

  1. M

    front main seal

    :: angry :: I do have an oil catch can from the PCV metal tube to the intake. Lines are somewhat kinked:: hommer :: its hard to keep the from not though, it was leaking well before I put that on so that was when I changed all the seals. Over the summer is when I started thinking about it and...
  2. M

    front main seal

    I am starting to wonder why the front main seal is leaking + what other people are saying as well. I am starting to think something is blocked and it is pressurizing the lower case. I put the new seals in less than 15,000 miles ago and the front main(from the amount of oil) and cam seals are...
  3. M

    Problem - BHG/Missfire/Bad Plug??? Help

    Hello all, I guess ill start from the beginning. A few years ago I blew the HG and I am having somewhat of the same symptoms. At idle the car bogs down and sounds identicle to and STi. It keeps the same sound and laggy-ness through the RMP shifts then all the sudden it goes away, then comes...
  4. M

    no heat

    Hello I just wanted to say that this exact thing happened to me about 3-4 years ago and it turned out I had a BHG. There was a small leak in between # 3 & 4 that I would have never noticed unless I pulled everything apart. I pulled the head off put all new gaskets on and it solved the problem. I...
  5. M

    Hot Engine Bay Problem

    Hello all, I was wondering if anyone has had the same problem as I am. With in the past couple months my engine bay has been really hot. The temp gauge is reading correct and I am not having any over heating problems but it is unbearably hot. You cant touch any part of the engine for more than...
  6. M

    popping and cracking under boost........

    I have been having the same problem. Running stock turbo @ 12-13 psi. and under full boost it seems like its sputtering and you can feel a slight let off and on thru the pull. Not jacking your thread but if anyone has the same prob or knows what the prob is.
  7. M

    Supra won't start

    Well I got the car back home and guess what it was!? That dame CPS wire. I unclipped it and blew all the old dielectric grease out and cleaned the connections out and it fired up. Everytime the tach doesnt jump its cause of the CPS. And i have had water in the galleys before and I know what...
  8. M

    Supra won't start

    Im going to check on it now cause the last time the tach wasnt jumping the wires going to the CPS in the green clip, 1 wire was not connected so im gonna go check now since it sitting in the car wash parking lot. I did get mass air flow sensor cleaner and clean it and it still didnt work car...
  9. M

    Supra won't start

    Hello all. I washed my car today at the car wash and I was using the power sprayer and water got up into the enging and soaked the filter. I started the car in the bay and it was putting then I gave it a little gas the stalled out. I pushed it out to dry for a bit. I waited a out 15 minutes and...
  10. M

    CT-26 Flange Dimensions

    Once again haha... simple question, simple answer!!! thats all i wanted to know. and DownButNotOut was the only one that didnt act like a prick and actually gave me the answer i wanted to hear... the CT-26 Dimensions. so here is some manners bud. thank you DownButNotOut, everyone else thanks for...
  11. M

    CT-26 Flange Dimensions

    once again it was a simple question i wanted to know the dimensions of the stock ct-26 turbo and now look where its at now. i didnt need people telling me that im gonna blow more money and its not worth the HP, i dont care it was a simple question and i needed 1 simple answer not a 2 page thread...
  12. M

    CT-26 Flange Dimensions

    all i did was ask a simple question and i needed a simple answer just like Down But Not Out gave me so thank you, thats why these threads go on for so damn long is because of stupid questions and comments, and trying to rip on people. a tubular manifold gets alot better flow than the restrictive...
  13. M

    CT-26 Flange Dimensions

    Hi, my buddy purchased a stainless steel manifold but i believe its the one from Ebay and i think that its a T4 flange. He is selling it to me but i want to make sure it fits first. I could somewhat measure the bolt to bolt pattern on the stock CT-26 Turbo flange but its not very accurate. I was...
  14. M

    anyone from IL or IN thats close please read!! lol

    do you need someone from hood open to hood close??? or do u need someone to bolt the clutch on the engine? cause i live in michigan but ive been driving to chicago the past couple of weekends. so let me know