Recent content by maj75

  1. M

    Converting pre-'91 door panels to '91 speaker grills?

    Has any one tried this? I have a 87 black w/ grey interior. I am buying a 91 parts car with the red cloth interior. It looks from my searching photos of both door panels that it might be possible to remove the metal bracket, that the speaker grill snaps into, from the back of the 91 door...
  2. M

    What bellhousings will bolt to a 7mgte?

    First of all piss off. Tone it down - SC Second, if you think that anyone on this forum knows what will bolt between a 7M and a Toyota transfer case in a 87 4runner, you are fooling yourself. If it isn't a Toyota transfer case, then: THIS THREAD IS WORTHLESS WITHOUT PICTURES
  3. M

    What bellhousings will bolt to a 7mgte?

    You are on the wrong forum. Go to www.yotatech.com. They are 4runner forum and this swap is fairly common. IIRC there is a version of the R154 that does bolt to the toyota transfer case. If you look at your 4runner's vin and tags you should be able to figure out what the truck came with...
  4. M

    Problem getting car to start, '87 7MGTE

    Well, the shop gave me back the coppers I had in it so I will keep them as a spare set. I was wishing that the plug replacement was the solution to the problem, but now, I am sure there is something else going on. The fact that I got it to fire after sitting for months with 3 year old gas in...
  5. M

    Project or problem?

    The BVSB is not your problem and long as all the vacuum lines are properly plugged. I'm sure someone will tell you that you engine is in extreme danger because the charcoal canister is not connected. Don't sweat the BVSB until you get the engine's blow-by figured out.
  6. M

    Problem getting car to start, '87 7MGTE

    No codes, two days at the shop and they have not figured it out yet...
  7. M

    Problem getting car to start, '87 7MGTE

    It is hot here and I thought that the cold start injector only worked at colder temps. It seems like a timing thing almost. It is so close to starting but just won't catch. Once running, it runs and idles perfect. It has really done this since I got it, only after cranking for a while, it...
  8. M

    Problem getting car to start, '87 7MGTE

    I have a 7Mgte with 5 speed, sat for awhile, got it running. Car is all stock. 94K miles. Recently replaced plugs and wires and fluids. New gas. Car always took a while to start when cold. Would crank at a fast speed for 10-15 seconds and then catch and sort of stumble to a start. Took it...
  9. M

    Scion T1807/T1806/T1808 Installation

    Would you be willing to part with your stock radio? I am looking for one to replace the one I have that stopped working.
  10. M

    Found rust on my car, should i sell or fix ?

    Pics of the underside of the hatch? I have seen many that have rust through on the underside at the bottom corners. If the only rust is the hatch, find a rust free one and swap it. Far better than trying to repair the rust through you have there. Trust me, that rust goes right through the...
  11. M

    Obsolete MKIII parts; are there any?...yet?

    I think there are only 2 taillight gaskets for 87-88 in the SE. rear hatch struts 87-88 2 Hoses that go on the stock BOV
  12. M

    Got a brake problem any ideas?

    No, Google it. Many places sell them. Can definitely get online.
  13. M

    Super Monitor Help

    I don't intend to install different injectors or a different AFM or turbo. This car is stock w/ 90K miles and I will keep it fairly stock. I am even having the stock radio repaired rather than replaced. Does anybody have an idea about what inputs the SM uses to calculate fuel range and fuel...
  14. M

    Super Monitor Help

    I have that one from the owner's manual, but I thought there was a self diagnostic one for the SM itself, to see if it is connected properly and getting the right inputs.
  15. M

    Super Monitor Help

    Just got a Super Monitor from a forum member and I need some trouble shooting help. I was told it was from a 88 7Mgte 5 speed. My car, a 87 had the SM plug and mounting studs. The brackets for the computer were fairly bent and I had to try to bend them back into shape to get it to fit the...