Recent content by lian

  1. L

    maftpro wont conect to tuner pro

    So I have a different pc and it has been 4 years since I've hook a pc up. so I have tuner pro rt on my new pc but won't detect. I have the maftpro plug to a USB adapter. any ideas?
  2. L

    Flywheel bolts backing out

    Ive always had horrible reading comprehension lol.
  3. L

    Flywheel bolts backing out

    FIG]74062[/ATTACH]all[ATTACH= they are longer despite all the measurement specs
  4. L

    Flywheel bolts backing out

    I would just buy a new one and a clutch plate if your pressure plate doesnt have any hot spots. what arps did you use cause I installed some 3 months ago and the measurements of them was the same as oem. and use red loctite .hope this doesnt happen to me knock on wood.
  5. L

    any one get these codes with maftpro

    Ok I fix the fuel cut afjusting the f out max but the one problem im having is the afr is going to 8.1 instead of the nice 11.5 .can anyone help it doesnt look like full throttle tech helps anymore
  6. L

    any one get these codes with maftpro

    21 22 24 32 34 I have been getting these codes and only see these under boost. For 34 and the boost cut I have been getting at 12 to 13 pounds I have pressure checked turbo to the end of the ic pipe before the throttle body. Is there a way to pressure test the intake to the head? I cant seem...
  7. L

    bolt on turbo wich on to pick?

    Thanks for the tip How is the spool on these
  8. L

    bolt on turbo wich on to pick?

    Hello ive had the supra parked away for a couple years and want to spruce it up. i had ct 26 57 trim from drift on it but it only lasted 5k and have been running a old stock turbo that keeps working. what options are out there that is not a godspeed or cxracing ebay turbos. what bolt ons have...
  9. L

    coil resistance

    hello im having a hesitation problem when trying to boost . when i checked the resistance i got .9 ohms on each coil when it calls for .3 to .5 ohms. does this make sence beforei go and buy 3 new coils. and im getting a knock sensor code and my car runs 9.7 when trying to boost too. plz help.
  10. L

    engine codes

    hello i have these for codes what should i look for and how to fix. 24 32 34 52 i have had these codes before but the light is staying on now. i have maftpro 57 trim ct26 arp head studs duel stage boost controller lc 1 wide band ,hard inter coller pipes rip off tial bov from drift mtotion,3...
  11. L

    boost cutquestion all ready did pressure test

    24 32 34 51 are the codes that were thrown i am not sure about 32 i have never checked codes and have had the car for 5 years this may help you guys
  12. L

    boost cutquestion all ready did pressure test

    57 trim from drift motion hard pipes ,three inch exuast maftpro 550 injectores, lc 1 wide band dual stage boost controller tial rip off blow off valve from drift,,new head gasket with arp head studs intercooler sorry i thought my profile said my mods there a couple little mmore mods but i cant...
  13. L

    boost cutquestion all ready did pressure test

    ok so im trying to eliminate all leaks im hitting fuel cut at 14 psi. so far i have checked the exhaust replaceds some studs for the manifold,i pressure tested up to the throtlebody and elimanated small leaks but i am still hitting boost cut . i need some more ideas on what to look out for if...
  14. L

    turbo screech or whistle

    can you put the the driftmotion kit in while the head is in the car
  15. L

    turbo screech or whistle

    there is only the same amount of play on the 57 trim from driftmotion when i got it i have only put 5 k on it i have oneexaust manifold stud turning in the head when i went to check them out and some others where not tight as when i touqed them after doing the headgasket.