Recent content by jon6.0

  1. J

    Alternator issue in 4-Runner w/ 7M-GTE

    Which is which for the connections on the alternator itself? I don't have any of those colored wires. There are two connections that are parralel to each other and one connection that is perpindicular to those. I think I'm using the lower parralel connection right now.
  2. J

    Alternator issue in 4-Runner w/ 7M-GTE

    Just got the truck a while back and the alternator took a crap the other day. Anyway, it only has one wire hooked to the back of the alternator that sends it a 12v signal when the ignition comes on and the other two posts in the back are unused. It's putting out 14.5 volts, but I'm curious as...
  3. J

    Overheating and Water Pump Questions

    Cool. Thanks. They are definitely the cheapest option. I looked at Summit and Jegs and the Meziere and others are $350-$450. Looks like next payday I'll try one out.
  4. J

    Overheating and Water Pump Questions

    Did you remove the impeller of your stock water pump like the Davies-Craig website says or are you just running it in series?
  5. J

    Overheating and Water Pump Questions

    DOH! The Davies pump is 110 Liters per Minute. Not per hour. http://www.hrpworld.com/index.cfm?form_prod_id=747,587_3529&action=product
  6. J

    Overheating and Water Pump Questions

    What does 110 lph equate to in gph?
  7. J

    Overheating and Water Pump Questions

    Well I just got back from another test drive. Took the top off, folded down the back seat, and left the windows down. It was dusk so it was only 103F.:aigo: Went right up to 230 and stayed there a while then started creeping up some more toward 240. So I left it in 5th and went 1200rpm...
  8. J

    Overheating and Water Pump Questions

    Where would I get a booster pump from?
  9. J

    Overheating and Water Pump Questions

    I have a 7MGTE in my 85 4-Runner rock crawler. I just put a 2-row aluminum 31x19 radiator with a 26x17.5 core in the back of the bed with a shroud and 2200 cfm fan. To get to the back I needed about 20 feet of piping and the radiator fill cap is above the back seat. It will idle and go...
  10. J

    Leaky injector seals

    So I have gas puddling up on my manifold from a leaky o-ring or seal. I went ahead and bought six injector seal kits. The manual says to use gasoline to lubricate the seals prior to installation. Can I use a dab of grease in place of the gasoline?
  11. J

    gt70r? help

    To put it into perspective for you. I have a 2005 GTO with a 6.0L LS2 that is going to run a single GT-70 STS kit. So I have double the displacement for the same turbo. I would expect it to be laggy as hell on a Supra. If it's a good deal you can try it and if it sucks then just sell it.
  12. J

    Various problems including adjusting timing and installing the jumper did nothing.

    Evening update. Put on the EGR blockoff plate. What a total PITA that was. This thing hauls butt now. On a dirt road as soon as the boost starts hitting it starts going sideways if you keep in it. All this with a detroit locker, 37" tires, and 8 psi. Tommorow I am also going to turn it up to...
  13. J

    I think I may have different injectors and AFM than stock?

    Thanks. I'll put up pics of the AFM housing tommorow morning when it's light out. I found one of the injectors not plugged in and now it straight hauls. On a dirt road as soon as the boost starts hitting it starts going sideways if you keep in it. All this with a detroit locker, 37" tires...