actually I've drilled and tapped a 2jzge (w58) flywheel for a 7mgte (r154) clutch/pp. The N/A flywheel is way thinner. I don't think th R154 clutch/pp would fit in the w58 bellhousing though. pretty fuckin big. And a note the pedal may act different and/or need adjustment because of the...
I love how this is the only thread to successfully make in onto my recent shit in UCP. I'm chillin on some Yellow Tale Shiraz.... I know it;s kinda cheap but it's smooth than cheap sake... and it doesnt take forever like beer and doesn't need to be sipped like liquor. And good liquor is fucking...
^^^agreed.
And to your parts list... Get it running first!!! Leave the twins everything. Once you've debugged what are actually bugs and not rich conditions/out of tune aspects of being modified. Take my word as one speaking from experience.
Also, you need to find out what tranny you...
I took my friend for a ride (via phone). He doesn't think it's mechanical at all. Just thinks it's electrical most likely wiring. I guess so. I'm just lost. I really don't like being such a noob. Before I freak out again. I am just going to quadruple check wiring and injectors... this gets so old.
I went over to a mechanic. He's always been very competent and methodical. Mark is kinda the same way except this guy can see/smell/hear my motor. So yeah, he listened to it. Why's there so much smoke. Thinkin. Lookin. He said to get a vaccum test done cuz it might be a bent or burnt exhaust...
^^^means it's okay. If it changed that would mean the MAP is reading different than what is actually there. If it was reading different, you should check the wiring before buying another MAP sensor.
***********************
okay, I finally did some cross reference thru google. THe 6097 NGKs...
I am talking with this guy about buying his EMU off him. It comes with harness and 3 bar map sensor. The above quote is out a PM. My question is will this Y001 map sensor work with the emanage ultimate or just EMB?
Thanks.
That's the ones Mark told me to get. I couldn't remember the # since it had been a week or two since I went to the Zone. I guess I will make my store stock them. I have an extra set on hand till they'd be able to stock them. Thanks for the info.
I was originally going to go with the Stinger...
appreciate it Jay, I already swapped out a map sensor to test it out. didn't make any change in behavior.
So what plugs should I be running anyway? I just got these NKG 7092s. Mark you told me something different over the phone, but I couldn't find them at Autozone.
I'm also piggyback...
Sup mark, your phone is acting up. I'll try your work tomorrow. I think I finally narrowed it down. It's just rich as fukkk.
I checked the rail, then changed my injectors to the originals (which that crappy place that fukt me said were low imp... retards). I changed the spark plugs (major...
okay, changed the sparkplugs and it ran. Checked the wiring. You could still tell that the idle was meh. I checked compression 160, 165, 165, 160, 170, 160 (front to back). I poured some fuel system cleaner in the half tank. Im gonna pickup some more spark plugs cause I just had it idling and...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.