Recent content by i165mk

nope maybe cause no fan shroud but it was fine before me rebuild

the turbo area under the hood is very hot and my exhaust tail pipe has very very hot air coming out is this normal ? there was white smoke coming out from the turbo area under the hood in the begininng but now no smoke at all under the hood is just very hot!

yea wen i come to complete stop blue smoke would come out not alot though. the blue smoke is gone now tho. but my turbo sounds like its getting "tired". took it too full boost once 6psi could the turbo still be on its way dead or seals r gone? and wenever i have the clutch down and throw it into...

i had a very small amount of blue smoke coming outta my exhaust pulled over and open my hood to check and saw smoke coming from the turbo area and it was getting very hot under the hood so i waited to cool down and drove again. it went away and i was idling for a bit and gave it a lil rev a...

id figured its the intercooler hose but theres the upper intercooler hose and i guess thats the bottom 1 ? any1 have a pic of it ?

what is connected to this side of the turbo i circled it in the picture. any1 has a picture of whats connected to it i cant seem to find anything that goes in there. i have dropped my motor in and about 99%done!

where does 15772A connect tooo

is there any pics of it ?what about the other side?

does any1 know where the 2 high pressure hoses go that connects from the oil filter housing where does the 2 left side go and the 2 right side go any1 have some pics of that side of the engine cant figure out where what hoses go on that side of the engine any help is greatly appreciated thanks...

where does the main studs go ?

ok i bought arp head studs and im installing them now when i install the headstuds i put them in how much pounds of tq do i do first and then how much wen putting the moly lube and then the nuts on can some 1 give me a walk thru on installing the arp headstuds and main studs plzplz

wen installing the mainstuds do i put the mainstuds first then the head studs in im using arps

any1 from queens any meets ?

alright thanks guys another questions is.. is shell oil good to run for the break in period ? what should i got with 5w-10 or 30 what oil is good for the break in period and after. and what manual transmission oil is good for our cars ?

wen installing the cometic HG install do i need to put anything on it or just put nothing on and just lay the cometic hg and put the bolts on ? is tq the arp head studs and main studs to 82lbs tq enough ?