Recent content by gmann

injector was unplugged

ty searched p0300 and found good info

how do you get a code 25 and code 26 at the same time does my o2 sensor have anything to do with it

some toyotas carry the same sensor just check the part number or the physical characteristics. finally got tired of waiting for a reply and investigated my own thread. removed own and took it to the junkyard. i believe i found some on some corollas and camrys i forget because there was so...

will any bsvs sensor from any toyota work on the 7mgte. this is the top sensor on the 3 prong thermostat housing

is it true that if you have a leak on your exhaust manifold it will cause your valves to burn up on a toyota

check your starter, next check starter wire, and check battery termienls

how do i go about getting my hands on one of these FelPro Gasket Sets. the sooner the better.

is it safe to use hondabond as a gasket for the intake manifold.

thnx

i bought a set from napa containing 4 rubber rings. i know where 3 of go but there is the 4th one thats about an inch in diameter about the size of the biggest part of the injector that i have no idea where it belongs. anyone have any clues to where this belongs.

is there any way to test the egr valve with it off the engine to see if it works

is there any way to this to see if ther egr valve is in good working conditon if its on the car. and is it possible to remove it without removing intake manifold.

cps is the winner thnx. and if you hear a loud whine it could be the metal plate behind the cam gears. it happened to me and i couldnt figure out where the noise was coming from. almost cut the PS belt. finally saw it spitting small metal chips. banged it back and no more noise.

what about the gust of air that keeps blowing the gasket is that normal. it is a strong gust too.