Recent content by eraezer

Does the pedal feel spongy? This is what usually happens when you have air in the system. If you put your car on jackstands, remove the service covers from the bellhousing of the gearbox and look at the movement of the clutch while someone is depressing the clutch pedal. Does it move? Does it...

It's primarily about the internal forces and resonances. Since it's a multiple of 3, the forces them self are well taken care of hence the expression that a 6-cyl engine is well balanced. The problem comes when adding the length of the inline six and focus is turned to the resonance frequency...

Hello, I have uploaded another video about my Supra mk3! Doing one round of zinc plating and yellow passivated done on some nuts and I'm taking you with me on the process! Please comment, like and subscribe! The photos I take are most often uploaded to my instagram...

Hello, I have uploaded another video about my Supra mk3! Now that I have a nice process to getting fasteners pretty before installation I'll do all of them! So I'm preparing half of the front suspension fasteners for zinc treatment and yellow passivation. First big step is of course sandblasting...

Hello, I have uploaded another video about my Supra mk3! It's finally time to install some bushings in the rear uprights! Two bushings per upright. One is a polyurethane bushing from Energy Suspension, the only one I have left from the kit I installed in 2010. So.... 12 year old bushings...

Hello, I have uploaded another video about my Supra mk3! Hold your horses! The PS pump is coming together! If you go through my videos you can see that there is a lot of work (many episodes) between each assembly. We have finally reached one of those rare occasions and this time it's the power...

Hello, I have uploaded another video about my Supra mk3! If you haven't, go watch the previous two episodes and this will make so much more sense! I'm stepping up my hardware game with zinc plating! To take it one step further I'm also going with yellow passivation or yellow chromate. I have an...

Hello, I have uploaded another video about my Supra mk3! I wanted to re-assemble the power steering pump today but comparing the condition of the hardware with the renovated parts I realize there is no easy way out. We need to take care of the hardware, the oily, rusty, worn nuts and screws. The...

Hello, I have uploaded another video about my Supra mk3! It's time for another "FINALLY"-moment! The drive shafts are being assembled! Can you see any difference from when I took them off of my Supra? Please comment, like and subscribe! The photos I take are most often uploaded to my...

Hello, I have uploaded another video about my Supra mk3! It's time for the uprights to go from a painted trio to a full set! The one I've been doing a CAD (computer, not carboard) model of is back in the garage and needs a full paintwork while the other ones only needs to be painted where I...

Hello, I have uploaded another video about my Supra mk3! The drive shafts have been prepared in any way possible for what's about to happen. They have been disassembled, rust have been removed, ancient grease have been evicted and it's now time for the last painting session of the drive shafts...

Hello, I have uploaded another video about my Supra mk3! We removed the boots from the drive shafts and cleaned of all the grease in the last episode. So it's now time for the last prep of the drive shafts before final paint! Please comment, like and subscribe! The photos I take are most often...

Hello everyone! I'm currently visiting San Antonio for work. I've already been here for a few days and I'll be staying for about a week and a half more. Not sure how alive this part of the forum is anymore but I thought I could at least try and reach out :) Is there anything supra or car...

You also have the option of running subaru wrx sti 2005 rotors but you need to open up the center bore for that.

Hello, I have uploaded another video about my Supra mk3! We have already completed most of the drive axles already, but that only affects form, it's now time to do something about the function as well. The objective is to replace the grease, boots and to remove the last rust. Is this the...