Recent content by dasz33

Thanks for the responses guys. CRE I plan on going back into the car Friday afternoon. Toyota wont have a gasket until Tuesday, local parts store can have a Fel-Pro and Beck-Arnley tomorrow. They said they would order both and let me have a leak. But I am beginning to think I may have a...

I know this is the return line for the coolant through the TB and ISC. But I am having a heck of a time trying to get this sealed after replacing my BHG. I used a cheap set of no name gaskets (I know this is my first problem). But I have checked with Fel-Pro, Beck-Arnley, and Toyota and none...

I just got back from SD. The car performed great, very comfortable freeway cruiser. Only problem was my plastic undertray ripped itself off at 80mph. My front bumper was trashed before I even got the car, so the undertray was never attached there. But anyway, back to the TPS... The car is...

I sprayed carb cleaner directly on all of the vacuum lines and diaphram. It was all good. I get the carb cleaner stumble when I spray around the #6 cylinder the intake side. I didnt try spraying from underneath the manifold though. So it could be an injector not seated to the head properly...

well, I lied... My idle is at 1000 and 1200 with the AC on. The TPS and the ISC are both functioning properly. When the car was idling at 600-700 yesterday I did set the timing to 10 degrees. I hear a hissing near the back of the motor on the intake side. When I spray some carb cleaner...

and BTW, I now have a happy Supra idling at happy 700-800 rpms :icon_bigg

Long story short: Read the TSRM it really will answer most of your questions. And thanks to everyone who reminds us SupraNOOBS that its there. referencing this thread http://www.supramania.com/forums/showthread.php?t=48048 So I was trying to figure out my high idle. I got the car for...

Thats what I was hoping for, thanks man!

Sorry to dig this up but I have my cluster out of the car and need to adjust my speedo. Its reading about 4-5 mph high. My question is, do I need to completly remove everything from the back of the cluster? The green circuit board plastic, and all of that? Or is there an easier way?

BAH! Thanks man! Not sure why I didnt see that the first dang time!

Ok guys, I just rpelaced my ISC, im not throwing any codes. But my idle is around 1000-1200 during normal operation. Ive done all of the high idle checks in the TSRM and Haynes manual. Back when I first got this running after a BHG, I had to rpelace the TPS sensor. I knw the TPS is...

ok thanks guys. I will try cleaning it out, since it does click, but it doesnt seem to move. Anyone have one availble? Dealer wants $500 for a new one...and thats more money than I have in the car... Thanks again Doug

Thats what I am already using. And it does not mention how far it opens or closes. But it does not seem to be moving at all, so Im guessing its bad.

Hello all, I have an 88 N/A Supra, 5 speed with a high idle (steady 1200 rpms or so). Going through the diagnosis I came to the ISC Valve. I dont hear any clicking from the valve after shutting off the motor. So I pulled it out for a benchtest. All of the ohms are good at about 25 ohms...

Thank you all for the replys. I think its the motor but cant get at the connections. Its not a fuse as far as I can tell because everything else adjusts. TOM, I tried your idea about turning the screw, but I cant get a good enough grip on it in the car.