Sounds like we might be having the same issue.... I can double check my reading off my wires when i get a chance and post some pictures. Weird thing is my wideband is getting reading at 14.7~15.0 when at idle so im at a lose about that one. I have a safc2 but as of now no corrections on LO...
Ok imma try and go in a different direction with thing thread.....
So what i would like to ask is
What would cause my ecu to give a CEL code 21 if i reset it and it comes on without me even driving. The moment i reset my ecu and turn the key on ACC it will already be blinking giving me a CEL...
Yea i bought one to but i need a spot to put it im already using my weld on bung for my wideband i have to go get my other one welded on. Im just not sure if its suppose to be 0.5v or 0.005v. and if it is working then why am i getting a CEL for something that is working? Even when i pull the EFI...
I got a CEL code 21 for O2 sensor, i swapped out the old 1jz for a 7mgte sensor and soldered them together. I used a voltmeter to check for continuity and voltage and im getting both. My voltmeter is reading 0.004~0.005 am i suppose to be getting 0.5 instead? thanks in advance
Here's everything in a nutshell,
I was pushing the car and a CEL kicked on and its giving me a code 31 so for a 1jz its Map Sensor. So i tried another map sensor and it nothing happened, i wanna try 1 more Map Sensor and see if i get different results. But i wanna know is, if i try a different...
Yes I had a fcd that went bad so I took it off and ever since then my car's been all outta wack.... I never even saw 15psi, I only ever saw 10psi but once the fcd came out now I'm seening 15psi and at 15psi I'm breaking up bad 1-14 psi im fine. I'm just assuming that my wastegate isn't opening...
I dont have a port coming out outta my turbo, I have a master power turbo.... I have a line running from intake manifold to the side of the wastegate not the top nipple. I'm not running a boost controller. Any input?
Sent from my SGH-T959 using Tapatalk
Just to 100% sure the vacuum line from the manifold connects to the compressor reference port? I have mine connected there.
Sent from my SGH-T959 using Tapatalk
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.