Recent content by bugz66

what works for me at high speed corners besides the suspension, is my tires (bridgestone potenza RE050a RFT) the run flat tires dont give out/fold as easily.other tires i have used gave out causing me to get oversteer/understeer.

Well i need some opinions on some set up options. this is my current suspension set up: H&R springs koni yellow in back (full stiff) tokico illuminas in front (full stiff) ST sway bars (front and rear) front & rear strut bars B pillar brace bridgestone potenza RE050a RFT 255\35\18...

i figured they are ST swaybars,they matched my green ST sways.and the springs are the same color .the front are linar and the back are progressive.only company that make both springs and sways...

ok i found some lowering springs and swaybars.no name on them the front swaybar is almost the same size as stock but the rear is alittle bigger and is adjustable. all of them are baby blue.if any one knows some ideal what company that makes them in that color? thanks sorry no pics at...

well i just found out it has a major boost leak due to some body ghetto rigging the upper charge pipe(keeps hitting fuel cut and black smoke when its starting boost.owner does not know what wrong with it.so i think will buy it.but i will keep the NA til i have this car in good working order. as...

well i just started the turbo and it started right up.it was sputtering for a little bit and the gas was way below the E mark. the turbo im worried about cuz i have a rebuilt one next to me.(was going to a NA-t) im looking to get it so i can do more upgrades to it,not too much.and have more...

ok well im considering on buying a 89 black turbo targa for dirt cheap but i would have to get rid of my 86.5 NA.my problem is that i know how my car runs and the amount of money it took to get it where it is as of today.well i need a little help on deciding and would like some opinions.here is...

i done mine in November with the kragens/o'reillys heater core (took about 8 to 10 hours) and i have no problem with it yet.and it fit perfect.i also use silicone on the inlet & outlet tubes so it will not leak. was well worth it!!

yea i was hoping it wasnt the 3.73 LSD but i think i will get a 4.30 LSD soon. thanks for the advice and not hating(like some honda fools)

well its kinda hard to shift to first while going 30 - 45 mph. im usually in second while going though some tight corners,but if rpms drop no low end at all.

ok,well my low end and mid range torque sucks.trying go around the twistys with great suspension set up but no low end,around 2000 - 3500 rpms. engine is stock NA 5 speed, intake, gutted cat, 2.5 exhaust. 3.73 lsd 255/35/18 tires/rims tuned up and timing in spec.10-12 deg all i have is...

here is some pics, i got her two months ago stock. what ive done already: knock sensor $210 :: angry :: knock sensor rewire should of done this one :nono: 90 LSD from a turbo tps full tune up because i was getting 50 freeway miles on half a tank :aigo: 2.5 cat back ,stock was rusted...

hey just got out of the honda scene :nono: so... i just got my 86.5 supra :icon_bigg .and just want to know anyone around the oakland CA area?