Recent content by 1990MA70

F: 18x9.5 +22 235/40 (Zestino Gredge 240) R: 18x10.5 +22 265/35 (Zestino Acrova) Suspension: HSD Monopro Coilover's Fenders rolled flat, No rubbing

I always wanted to be a part of the 1jz list, I think i finally made it. Did power runs today and made 390WHP - 350WTQ at 19~psi https://www.youtube.com/watch?v=Ih2r-w89Kqw&feature=youtu.be Short list of specs: internally stock 1jz-gte hx35 turbo aem v2 deka 880cc injectors 320lph...

I've made a little more progress on the supra, i had the car dyno tuned but unfortunately i had some problems. Firstly my boost controller just didnt work, looks like a plumbed the "in" ports opposite, so im going to go take it out and see if it makes more boost in the bext week or so. Next my...

Thanks Marco, I'm using a 46mm f46 tial replica from driftmotion, sounds pretty cool since its a screamer. The stock hx35 wastegate spring was a little too high for my liking so i had the wastegate actuator tack welded so its always closed

Thanks! I gave it about another 1/8th of a turn and its stopped completely (as of right now) But i did grab a brass plug and some different thread sealer just in case i ever have problems with it in the future. I'm keeping my fingers crossed, but thanks for the suggestions!

Its been a great turbo. A little heavy but even on stock injectors and ecu it made really nice power. Spool is pretty good for an old turbo too. Comes on super hard at about 4000rpm. I think even 400whp is pretty obtainable on a good tune and maybe (+-)20psi but ill be able to let you know once...

I've slowly made some progress on the car getting the fuel system in and working properly with the AEM v2 and tracking down leaks Here's where im at There's some small things id like to do with the engine bay once its running right again to make it a little less messy. Particularly on the...

Got my fuel system sorted out. Really awesome guy in high river sold me the whole kit, it was a great deal since i didn't have to buy it from the US with the dollar so low. Kit is a top feed with Siemens Deka "850cc" Injectors Also got a filter and a AEM FPR Only thing left is a pump then ill...

Quick little idle video. Weather still needs to be a bit better to get motivated enough to have it completely finished https://www.youtube.com/watch?v=rE28DqIy4G0 The "plug and play" doesn't read factory O2 sensor so ill need to wire in my wideband aem that i bought to watch afr's. Looking...

Well... I guess I'm overdue for the next chapter in this build. This winter the supra will see the power mod's its been patiently awaiting, and maybe a few more extra's to go along with it. (we'll see how my budget looks in the following months leading up to spring. But for now i'll leave you...

Looks like ill be better off with a 60mm if i upgrade. I'm thinking the 1jz wont spool it as nicely as the 7m. Thanks for the info Never had problems with the turbo smoking oil... In all honesty my oil level hasn't made any noticeable change since i changed it a few months ago, Which is a...

Nice looking swap. What kind of clutch were you using when you ran into the crank walk issue?

Awesome i'll definitely look into that, thank you. Also If you don't mind me asking, where did you get the 62mm upgrade for the hx35? I've been looking at the BAE 60mm and have been interested in upgrading for a while now. If you have any video's watch id like to see them as well. I hear the...

Didn't keep the A/C but it wouldn't be hard to keep it. Also didn't keep the cruise control. Still have power steering though. The car never came with ABS or Traction Control so i never had to worry about that but it probably wouldn't be much harder. just some extra wiring. IIRC my ecu and...

Haven't done anything. Still daily driving the car with no problems. Looking at getting a plug and play ecu of some sort soon but with the Canadian dollar so low i'll have to pay damn near an extra 25% to buy from the states... So I'm just holding off for now. Hopefully next year ill have an ecu...