Wiring Harness connector

mecevans

Supramania Contributor
Jan 18, 2009
1,295
0
0
M-bay, cali
Im cleaning up my harness and found 3 missing connectors. What do they do and where can i get a plug?
 

Attachments

  • 0226001852..jpg
    0226001852..jpg
    14.2 KB · Views: 22
  • 0226001852a..jpg
    0226001852a..jpg
    16.2 KB · Views: 23

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
tranny connector 4 pin, ground that bolts to a intake manifold bolt, and the start connector.

edit: or are you talking about the ones missing the connectors? in which case what colors are the wires.
 

mecevans

Supramania Contributor
Jan 18, 2009
1,295
0
0
M-bay, cali
yellow-brown dot , red-black line , and two browns.

i am assuming the browns are knock's also. Harness had crappy cable going from ecu to knock sensor. i bought new coax cable and will be re-doing it either way.
 

mecevans

Supramania Contributor
Jan 18, 2009
1,295
0
0
M-bay, cali
yellow-brown dot , red-black line , and two browns.

i am assuming the browns are knock's also. Harness had crappy cable going from ecu to knock sensor. i bought new coax cable and will be re-doing it either way.
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
knock sensor are brown and at the ends its clear.( plug side to a certain point is clear and the pins on the ecu are clear also.)

edit: the yellow and black red go to a little 2 pin white connector that im not sure if it gets used. might be the reverse lights but idk for sure.
 

hvyman

Dang Dude! No Way Man.
Staff member
Apr 17, 2007
12,568
1
0
Fullerton,CA
center wires? knock sensor wires are shielded as im sure your aware of. they are brown wire most of the harness. the actual wire it self is the copper color and they instead of having a colored cover its a clear cover and the the sheilding is wrapped around and then there is the brown cover over that.
 

92TealSupra

Supramania's Parts Man
Sep 2, 2008
1,584
0
36
Great Lakes State
hvyman;1521839 said:
knock sensor are brown and at the ends its clear.( plug side to a certain point is clear and the pins on the ecu are clear also.)

edit: the yellow and black red go to a little 2 pin white connector that im not sure if it gets used. might be the reverse lights but idk for sure.
That two pin white connector does indeed go to the reverse lights on our cars.
 

mecevans

Supramania Contributor
Jan 18, 2009
1,295
0
0
M-bay, cali
edit: 2 wires are knocks. still wondering about that cut plug. i will be going to the yard this week to find one.