What size WG spring does the driftmotion 60-1 kit come with?

Travis89turbo

New Member
Sep 21, 2010
30
0
0
Utah
Hey guys. I am waiting for my DD 60-1 turbo kit for my 1jz. I am wondering what size spring the WG comes with? Thanks in advance
 

Travis89turbo

New Member
Sep 21, 2010
30
0
0
Utah
Poodles;1670434 said:
Why are you asking here when you could ask in their section or email/call them?

For the next couple days I cannot make a call or email outside of a goverment. Num. Or email address. But I should have put this in there section. I apologize for that. I'm new to the site and didn't kno I could ask questions in there section.

Atleast I still have internet access!!!!
 

Travis89turbo

New Member
Sep 21, 2010
30
0
0
Utah
Poodles;1670445 said:
Could PM Aaron as well, dunno if that would be considered "e-mail" though...

I tried, it firewalled me. I was surprised I'm able to post!! Atleast its Jus till Monday! 3 days is long enough with out a life. Haha. I wish I would of thought about it before today cuz now its gonna be on my mind!
 

mensrea

New Member
Sep 6, 2009
211
0
0
Schofield Barracks, HI
It's just a Tial 46 mm. When I got my 60-1 kit that's what it came with.
44 and 46 mm springs are interchangeable as far as I remember.
I think I had a large yellow, it was around .5-.6 bar, not sure, I run a boost controller anyway.

here's a spring chart for 46mm Tial

2.901 psi .20 bar Small Yellow
4.351 psi .30 bar Small Red
5.802 psi .40 bar Small Green
7.252 psi .50 bar Small Blue
8.702 psi .60 bar Large Yellow
10.153 psi .70 bar Large Red
11.603 psi .80 bar Large Green
13.053 psi .90 bar Large Blue
14.504 psi 1.0 bar Lg. Grn + Sm. Yellw
15.954 psi 1.1 bar Lg. Blue + Sm Yellw
17.405 psi 1.2 bar Lg. Blue + Sm. Red
18.855 psi 1.3 bar Lg. Blue + Sm Grn
20.305 psi 1.4 bar Lg. Blue + Sm. Blue
 
Last edited:

Travis89turbo

New Member
Sep 21, 2010
30
0
0
Utah
mensrea;1671117 said:
It's just a Tial 46 mm. When I got my 60-1 kit that's what it came with.
44 and 46 mm springs are interchangeable as far as I remember.
I think I had a large yellow, it was around .5-.6 bar, not sure, I run a boost controller anyway.

here's a spring chart for 46mm Tial

2.901 psi .20 bar Small Yellow
4.351 psi .30 bar Small Red
5.802 psi .40 bar Small Green
7.252 psi .50 bar Small Blue
8.702 psi .60 bar Large Yellow
10.153 psi .70 bar Large Red
11.603 psi .80 bar Large Green
13.053 psi .90 bar Large Blue
14.504 psi 1.0 bar Lg. Grn + Sm. Yellw
15.954 psi 1.1 bar Lg. Blue + Sm Yellw
17.405 psi 1.2 bar Lg. Blue + Sm. Red
18.855 psi 1.3 bar Lg. Blue + Sm Grn
20.305 psi 1.4 bar Lg. Blue + Sm. Blue

Perfect....that's exactly what I needed. Thank you guys for your help!
 

Blackdawg

Taco Soup..my rides
Oct 12, 2010
247
0
16
Wyoming
mensrea;1671135 said:
Just remember that if you get like a 1.1 bar spring set, you can still push it to 1.4 bar ++ with a boost controller. You can go higher but not lower.

exactly. so id get like a .7 bar spring IMO.

sorry for the screw up on the kit!