My EFI system has been out of whack (ECU thinks it's running lean, so I'm now running rich) for a while so I finally broke down and started testing.
I was testing voltages (per FI-32 in the TSRM) and everything was within spec. except for VTA-E2 (Throttle Valve fully open, it read "3.63")
After completing the testing of page FI-32, I started working on my VTA-E2 problem (page FI-37).
My Results:
-Correct voltage between VC-E2
-TPS is fine
-Wiring Between ECU and TPS:
E2 Wiring Resistance - 0.8 Ohms
VTA Wiring Resistance - 1.0 Ohms
-I don't have another ECU to play with
I was wondering if someone could tell me if those resistances are correct?
Thanks in advance!
I was testing voltages (per FI-32 in the TSRM) and everything was within spec. except for VTA-E2 (Throttle Valve fully open, it read "3.63")
After completing the testing of page FI-32, I started working on my VTA-E2 problem (page FI-37).
My Results:
-Correct voltage between VC-E2
-TPS is fine
-Wiring Between ECU and TPS:
E2 Wiring Resistance - 0.8 Ohms
VTA Wiring Resistance - 1.0 Ohms
-I don't have another ECU to play with
I was wondering if someone could tell me if those resistances are correct?
Thanks in advance!