Might sound like a Stupid question and Im starting to learn a little more everyday about this setup.....
How or Why would you modify the VE table. Only Problem that Im running into at this point in the setup is that under boost, I cant get my A/F ratio to Drop Quick enough....... ie, I do a Hard boost pull in 3rd gear on a roll at 40mph up to 18 PSI and my A/F will stay at 14.7 until I let off the gas then It will drop to 10.5 and back up, Im not going lean but Im not going right either until late.
Ive increased fuel at the top end 10% with no change....
Only thing that I have done different here is I went back to my HKS EVC IV boost controller as I blew the MAFT Pro one out (I guess the dual port wastegate did it) but I havent changed any of the MAFT Pro Settings yet to reflect no boost controller. Would this effect it or is the MAFT Pro trying to read its own boost still?
Did a little reading about modifying the VE Table but I have no Idea on where to start, It was a really really short paragraph. I want to get this resolved before going any farther. any Documentation would be great also for reading if anyone could link me to one.
Oh, PTT is Disabled and AFR Tracking is Disabled
Thanks all
Robert
How or Why would you modify the VE table. Only Problem that Im running into at this point in the setup is that under boost, I cant get my A/F ratio to Drop Quick enough....... ie, I do a Hard boost pull in 3rd gear on a roll at 40mph up to 18 PSI and my A/F will stay at 14.7 until I let off the gas then It will drop to 10.5 and back up, Im not going lean but Im not going right either until late.
Ive increased fuel at the top end 10% with no change....
Only thing that I have done different here is I went back to my HKS EVC IV boost controller as I blew the MAFT Pro one out (I guess the dual port wastegate did it) but I havent changed any of the MAFT Pro Settings yet to reflect no boost controller. Would this effect it or is the MAFT Pro trying to read its own boost still?
Did a little reading about modifying the VE Table but I have no Idea on where to start, It was a really really short paragraph. I want to get this resolved before going any farther. any Documentation would be great also for reading if anyone could link me to one.
Oh, PTT is Disabled and AFR Tracking is Disabled
Thanks all
Robert