torque specs

[MKIII TURBO60-1]

looking for arp main studs and eagle rods torque specs

 

[Kevin]

wouldn't they be stock torque? and if not wouldnt they have come with their own spec if needed

 

[MKIII TURBO60-1]

i bought a motor that was assembled already and had a friend i trust that has built motors that have been proven to make great power.I had him check everything and also port and polish my head.I started this thread because arp torque specs are more than likely different and if someone would answer this for me the information will now be aviable to those who search like i did but i found nothing at the time and this thread will be there to answer their question

 

[hvyman]

They come with there own spec. Iirc the eagle come with arp bolts in which case you can just go to arp's website and call them to get the right torque specs.

Apr's torque spec is sometimes different.

 

[IJ.]

If they're ARP 2000's 3/8-24 thread bolts in those rods torque to 50-55 ft/lbs using engine oil on the threads and under the head.

I torque ARP m12x 1.25 Studs with Moly grease to 80 ft/lbs.