Too Low?....

[MK_rider]

I think my Tanabe Hyper Medalion is hanging too low. I want it to be a little higher. The resonator is really low also. Its on hangers btw. Did any of you guys get this problem? Any way to make it a little higher?. Thanks.

http://i280.photobucket.com/albums/kk164/MK_rider/crap055.jpg?t=1209908889

 

[MassSupra89]

That is pretty low. My exhaust tucks right into the stock cutout, about a 1/4" from the bumper.
I don't see how the rubber hangers could stretch far enough for it to be that low so it looks like the best fix would be to cut and re-weld the hanger brackets on the exhaust.

 

[Pantaloon007]

^^^+1

 

[MK_rider]

That is pretty low. My exhaust tucks right into the stock cutout, about a 1/4" from the bumper.
I don't see how the rubber hangers could stretch far enough for it to be that low so it looks like the best fix would be to cut and re-weld the hanger brackets on the exhaust.

Well when i try to push it up, it was on pretty tight.

 

[tlo86]

make sure both of the exhaust hangers on on it there is supposed to be 2 on the tip and actually if there is a rubber ring it will have 2 everywhere

 

[Poodles]

looks like you only have one rubber ring on each of the hangers...

 

[MK_rider]

looks like you only have one rubber ring on each of the hangers...

Well the exhaust hanger didn't even reach to the part where it was soppose to hang. I'll give it another shot....

 

[JDMMA70]

Wow thats low check your donuts and see if there are two where the muffler is

 

[Poodles]

better pics of the hangers is really needed...