The Small Questions Thread

Dan_Gyoba

Turbo Swapper
Aug 9, 2007
1,836
0
0
Alberta
www.gyoba.com
If it has the speed sensor on the tail housing. the speed sensor should be on the left hand side and has (IIRC) a 4 wire connector on it. It will be separate from the 2 wire reverse light switch.
 

mirage83

Member
Mar 21, 2008
457
0
16
Georgia
Dan_Gyoba;2082449 said:
If it has the speed sensor on the tail housing. the speed sensor should be on the left hand side and has (IIRC) a 4 wire connector on it. It will be separate from the 2 wire reverse light switch.

Thanks for the info, it's much appreciated.
 

MeowBox

New Member
Aug 8, 2012
6
0
0
CA
So I ordered a reman power steering pump from DM and I received a pump I'm not familiar with:

Reman'd on the left, stock 89 Turbo on the right:
9f4vqiy.jpg


JvOVp6G.jpg


tKkKIbP.jpg


The adjustment bracket holes are in different locations.

Does anyone know what this is from? What year?
Should I try to send it back? I don't have a bracket for this one and the woodruff key wont fit without shaving it.
 

drogon

New Member
Oct 29, 2013
249
0
0
Dallas Texas
I got my car running again after totaling my last shell. I noticed this wire when I bought it and it was running. It's getting hot enough to start melting the old electrical tape. It goes strait to the body harness. Is it even supposed to be connected to the positive? That's how it was set up before
8322d883d1ef5b26f4ac9961df22f654.jpg



Sent from my iPhone using Tapatalk