TEMS switch

[Jostar]

Good morning everyone, My question is..

Can I use the TEMS switch as a on & off switch???

The wiring is

Red=power?

white & black strip=???

White=???

I am trying to use it for the PRO-EFI as a traction control switch....

I hope someone really knows the wiring for this.. I try to understand it but not I am the greatest at wiring diagrams..

 

[jetjock]

Don't see why not. Use pins 1 and 2. Will be closed in Sport

 

[Jostar]

What colors should I use??

 

[Jostar]

Red= pin 1??

White= Pin 2??

White & black=????? is that the light for the TEMS switch?

 

[jetjock]

Colors? Whatever ones are connected to pins 1 and 2. Looks like B-R and V:

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=114

See the "A" next to the connector? Go to the pages following the schematics:

http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=117

If you're going to leave TEMS connected power your device from pins 2 and ground. You can use pin 3 for that.

 

[Jostar]

Correct me if I am wrong

Pin 1= Red wire= Power

Pin 2= White wire( what would trigger the traction control)

Pin 3 = White & black= Ground

I am soooo dumb at reading electrical diagrams lol....

 

[jetjock]

Yep, that's it. I understand something as complex as a single pole switch can be baffling but that wasn't so hard now was it? You're welcome btw...

 

[Jostar]

Thank you so much Sir, Electrical is def my weakness lol... I am terrified by it.. lol... NOw I have to figured out the TEMS LED lights how to power those to tell me when the Traction control works... wanna help?