Suggestions for Turbo Upgrade (NON CT Series) - Turbonetics or SP?

[CtownDawgs88]

Hi Looking to upgrade the CT-26 57 Trim I am running now.

Suggestions on what I can use and still keep the same Exh Manifold and aftermarket downpipe (same bolt pattern as stock)

Here is by buildpage = http://www.supramania.com/forums/showthread.php?132619-88-7MGTE-Mod-Sleeper-For-Now-450-HP-Easy-to-Get-with-this-Setup

Thanks for your suggestions and time, Not looking at replacing the manifold with tubular and a v-band downpipe connection - possibly next year

Mike

 

[mark1987supra]

I am running a SP61 and loving it. They have a PT5857 going for dirt cheap.

http://www.spracingonline.com/store/category.php?category=96&vehicleid=

 

[mecevans]

Sp61gt
Turbo-a ct26e
Masterpower
boss sr
Turbonetics

Few of the bolton units that i know of.

 

[dubsupra209]

I am running a SP61 and loving it. They have a PT5857 going for dirt cheap.

http://www.spracingonline.com/store/category.php?category=96&vehicleid=

That's the price they should have always been.

 

[mecevans]

That's the price they should have always been.

Your getting a bigger turbine, compressor, and shaft.

 

[te72]

Thanks for your suggestions and time, Not looking at replacing the manifold with tubular and a v-band downpipe connection - possibly next year

Mike

Mike, if you are planning on replacing the setup next year, why not save the money now and do it how you want sooner than later? Given that any money spent on a turbo upgrade now would keep you from that goal... it's what I would do. Remember, having a solid plan will save you a lot of time and money with a car project.

That said, if you're definitely going to go this route, I would see what options you could get in a ball bearing upgrade. It's one of those things that seems to convert anyone who says it isn't worth the extra money.

 

[MarkIII4Me]

Here's what I was able to put down with a bolt-on Turbonetics Hifi 62-1.

http://www.supramania.com/forums/sh...whp-with-bolt-on-turbo-*-dyno-vid-and-chart-*

 

[Moy]

Any information on those few turbos out there with CT turbine and compressor housings with Garrett CHRA's? I'm about to pick one up but don't know who's been making these or any of the specs on them...