Red Wire Mystery

[ImCressid]

The red wire in the picture is just hangin there in the breeze and I known its important because hot at all times
I turned my fuse box around to see with no luck. The picture is show junction block number 1 and the red wire comes from the same group of wires at connector 1a. Its a red 10gauge wire

 

[ImCressid]

Anyone have any full 360 pictures of the fuse box by the kick panel
Front back and the sides
With connectors and all

 

[TurboStreetCar]

You have all kinds of wiring issues.

Better Pictures would help showing what connector its coming from.

Connector 1A is shown here. http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=036

No solid red wires. only a solid black, solid white and a white with a red stripe.

Connector 1A is a three pin connector shown here http://www.cygnusx1.net/Supra/Library/TEWD/MK3/manual.aspx?S=Main&P=16

Must be from somewhere else. This is all supra harnesses right?

 

[ImCressid]

Nose chuncks
Yes I do have all sorts of wiring issues
this is why
I will never buy a started project unless i do it
Yes its all supra harness
I know in the connector there are only three wires but when you look in the car there are four wires three go to connectoer 1a and the other is the one I cant find where it belongs or goes
I want to by a thrashed harness or spare for cheap and use it as a reference or as my spare, but its hard to find a completely uncut soo...
Thanks

 

[NashMan]

you asking question that can not be answered

all you have to do is case wires now and find were it is tapped and were it going that is all

it's all up to you now

 

[isnms]

If that wire is just stuck in with a leg of a fuse, as it fuzzily appears to be, it's not a stock wire. Like nosechunks said.
So do like NashMan says and trace the other end.

Looking at it again, it looks like it may be a fog light rewire. Can you turn on your fog lights without the headlights being on?

Look here - http://gallery.sanitylapse.com/v/supra/Foglight+Rewire/

 

[isnms]

So did you get it figured out?
Were any of these replies helpful?