Question for those with stainless fuel line

[BJ91T]

Was just wondering what you guys use to hold the stainless braid line securely under the car when you have to run a line from tank or sump up to the engine bay. I have to run a -10 AN line from my pump hanger to the firewall then Tee off to dual -8's then run a -6 from the AFPR back to the tank (pump hanger).


Thanks In Advance
BJ

 

[BJ91T]

come one duane you know you have the answer lol

 

[gofastgeorge]

P-clamps work well.
Also known as just 'hose mounting clamps'.
Any hydraulic or industrial supply house has them in different sizes.
So does Summit Racing:
http://www.summitracing.com/search/...ection/Hose-Line-Clamps-Brackets/?Ns=Rank|Asc

 

[BJ91T]

Ok cool and as far as holding them up to the body?? sheet metel screws would back out over time or am i wrong?

 

[gofastgeorge]

I have never had a problem.
I use the sheetmetal screws with hex heads, and drill the hole a little on the small side,
so that the screw forms a better/longer thread.