Power steering rack fitting questions...

[Oppie1]

I have an e-mail out to Driftmotion, but I heard they were busy, so I probably won't get a response back for awhile. Figured I would throw it out to the community in case someone else has this problem.

I bought the DM SS braided line for feed, which works well, but I want to run stainless for the return line as well from my -6 cooler and the fitting seems to be a tad different. I was wondering if anyone knows exactly what fitting I should buy for that? I have a SS line for the return already with a -6 end and a -6 to -8 adapter, but it only goes like 2 turns before stopping.

Pics attached...

 

[Cz.]

If I remember correctly, the fitting I purchased for that side was 17x1.5mm, it converted to an-6

 

[Oppie1]

If I remember correctly, the fitting I purchased for that side was 17x1.5mm, it converted to an-6

Thanks for the reply. Aaron suggested using stock fitting with part of stock hose and braze a -6 on.

 

[Cz.]

It took me a while to find the fitting and I think it was a custom one-off batch that some shop was selling, so that may be the fastest option.
I tried looking for the original place that I purchased it from but searches aren't bringing anything up...

 

[Oppie1]

I think I found the right one: http://www.pscmotorsports.com/-SF07-6JIC-x-17mm-1.5-I.F.-Return-Adapter-for-Toyota.html

 

[Cz.]

That's not the place that I purchased it from, but that is the same size fitting ends that I purchased.

 

[sous]

i think you need a fitting like that
http://www.beechperformance.com/images/DSC01520.jpg

 

[Oppie1]

Just wanted to give everyone an update that the fitting I posted a couple posts back works perfectly! Part isn't too badly priced, but the shipping price is rediculous.

 

[Oppie1]

BTW - Driftmotion carries the fitting now: http://store.driftmotion.com/static/i-toyotapowersteeringrackreturnfitting.php