post a picture of ur custom trunk set up
- Thread starter 89TMKiii
- Start date
JustAnotherVictim
Supramania Contributor
That's pretty much my bro's set up, clears the targa perfectly.Fastway135 said:Here's my extremely basic setup when I first got it in before I got to hiding the wires. Not the loudest but gets the job done on the inside.
canadian said:
More pictures here:
http://www.born2drv.com/gallery/interior_exterior
I had a car audio shop make them... Basically they made a peice of wood to fit in that panel the same size/shap of that vinyl OEM panel. then they made a wood circle with the inner diameter to fit my speaker, and the outer diameter about 1/2" larger and propped that up at an angle to the base panel using dowels. Once that was in place they stretched out cloth from the center of the speaker hole out and around the edges of the base board. Then they juse put the fiberglass resin over this cloth so it would harden, made several layers so it would be very stiff, removed the wooden dowels, and gave it a light sanding and then stretched overtop and glued down the color-matched vinyl.
IJ. said:
How in all GOD'S name did you get the Ark of the Covenant in your house without melting to the ground?