PNP AEM EMS sync?

[jonny87turbo]

I turned the injectors off to check The sync and it stayed off when I turned the motor over. I up loaded the stock 1110 stockmaf.v1.19 base map.
Its an 87-88 pnp EMS. Any idea of why the sync doesn't turn on?

 

[Halsupramk3]

you can turn one off at a time and have someone else listen with a stethoscope rod to each injector to make sure it is firing.

turning each injector off and on with the check mark should be fine. thats 1,2,3 only cause it is batch fire setup oem. i switched mine over to sequential and its great. much better tunabilty.

send me your map at this email

halsupramk3@bellsouth.net

or post it here.

 

[jonny87turbo]

Ok I got the sync to turn on when the motor turns over. I went into the options menu and the cam=spare speed was off. It was pretty much dumb luck. Anyways I tried to start my car but it wouldnt start it kind of hesitated for a second and stalled. I emailed you my map.
Thank's, I appreciate it.

 

[Halsupramk3]

have you selected the injectors in the sensors/injector wizard?

goto map as soon as possible and the car will be eaiser to tune. i sent you an email.

please list all engine related mods. ie injector, map sensor and where its wired in, ait wired in?, turbo, etc.