Alright I just recently started to smell this aweful oil burning while at OP TEMPS only. The smell will come and go in traffic and on freeway driving its a bit more noticeable. This is of course only when the car hits OP TEMPS. I took off the according tube and found oil sitting on the lip of the ct26. No tracing on the plumbing ( I also have a Catch can with proper plumbing to intake tube and TB) and at the plumbing of the PCV system. Its burning as i can see it floating by sometimes.
I'm stumped on this. This is a Stock ct26 with over 180k... ( I know) rebuilt motor with 5k and on Castrol 0w-30 syntec.
Any advice would be nice.
PS. Spark plugs are clean from oil residue and can only find the normal bright red high speed glazing symptoms. Smell is not present when cat is installed; only when the test pipe is.
I'm stumped on this. This is a Stock ct26 with over 180k... ( I know) rebuilt motor with 5k and on Castrol 0w-30 syntec.
Any advice would be nice.
PS. Spark plugs are clean from oil residue and can only find the normal bright red high speed glazing symptoms. Smell is not present when cat is installed; only when the test pipe is.