nyc afc neo help

[Mr.Forks]

hey guys, anyone in the nyc/nj area have an afc neo installed?
i have a unit here and want to test if it works, and get the firmware info off of it- basically what i want to do is take your unplug your neo, and plug in mine and see if it works.
anyone help me out with this?
thanks

 

[isnms]

You want the firmware info off your NEO ... iirc ... Just apply +v to red/white and ground to brown of the 4pin connector. You will be able to cycle through screens on the NEO. You can use your car battery or even a 9V will power it up.

 

[MX73MKIII]

I know this is off topic but who did you have to tune your NEO? I'm gonna install mine tomorrow.

 

[isnms]

^Who are you asking?
If you're asking me, I did. I used my ZT-2 wideband logs and the Gain Adjustment Worksheet I made, posted in my Sig, to tune mine.

 

[MX73MKIII]

^Okay cool. How much would you charge to set mine up?

 

[isnms]

I'm not in New York.

Everything I used, from wiring the wideband and the afc in - to the worksheets I used to tune, I have provided in my sig. I can try to answer any question you have about those.

 

[MX73MKIII]

I'm not in New York.

Everything I used, from wiring the wideband and the afc in - to the worksheets I used to tune, I have provided in my sig. I can try to answer any question you have about those.

Oh sorry, didn't pay attention to where your from. Yes, I will definitely check those links out and PM any questions I have.

 

[isnms]

Here is two more bits of info to take into account when tuning.
The EGT is not necessary, but gives you more info.

• Exhaust Gas Temperature - EGTs
• Wideband Air/Fuel info