no start after 7mgte swap

thebadz32

New Member
Mar 16, 2008
124
0
0
Louisville Ky,
well i did a 7mgte swap in my car and i can get it to start it seems to be getting fuel up to the motor but it doesnt seem like the injectors are opening it is getting spark and ive been messing with the timeing but no start up help asap please

thanks
 

kotu100

Active Member
Nov 23, 2006
1,899
0
36
Easton, Ma
i know its just basics but.....
make sure both cam gear marks are lined up with the rear cam gear plate, at the same time the mark on the crank must be at the 0 mark, all while cylinder #1 is at TDC.

then the CPS must be installed so it looks like this.
6389952


also just for shits and giggles make sure the pins on the cam gears are both in the middle hole on both the cam and cam gear.

if it doesnt start after you've done all of the above, you have a fuel or electronic issue.
 

sneakypete

Regular Member
Jul 18, 2007
1,129
0
0
Central NJ
and be sure to go over the obvious... everything is plugged in such as coils packs, ignitor, all grounds are connected and clearly.. check the fuses
thats a start
-pete