No power at fuel pump relay after hks vpc install 7mgte

[supraman8779]

Like the title says no power at the fuel pump relay.... all fuses are good, pump will work with the diagnosis box jumped.

I did take the maf sensor out after installing the vpc..... car will run but only if I jump the diagnosis box.

I did find the maf sensor has a switch for the fuel pump... I'm just looking for suggestions at this point.

I did the the pump 12v mod also.

 

[3p141592654]

Does the fuel pump run during cranking?

The GTE AFM does not have a switch for the fuel pump. That's only for the 7MGE

 

[figgie]

Did you verify that you tapped the correct wires with the VPC and you did not accidentally cut the wires (especially with the age of the cars, that is a more than likely scenario)?