New idea for FFIM?

[kamikazemkiii]

I was in the junk yard today pulling some parts off of a 7mge when i turned around and noticed there was a bmw right behind me and so i went to look and it struck a bell FFIM have no idea if it really would work but it looked pretty neat and just curious of what you guy think

i was thinking of fabbing it and using it as a upper runner?

1989 bmw 750il

Dont give me any B.S just seeing what others think

 

[CFSapper]

Thats in a junk yard !!!!:aigo: wow

 

[HommerSimpson]

well .. id say need to see them off and look at .. but yea its posible

 

[kamikazemkiii]

Thats in a junk yard !!!!:aigo: wow

yessirpp

 

[kamikazemkiii]

well .. id say need to see them off and look at .. but yea its posible

im gonna go back in the next few days and cut it because its a long manifold

ill post more piks if everything turns out ok

 

[DL.]

I don't know BMW stuff at all, but kinda seems a waste to tear into that to make a ffim for a supra. It's almost easier to use our stock lower and fab from there. Or make them completely from scratch. I've done several both ways. The biggest thing for most people is a tig welder.

 

[funky_monkey58]

The runners will even be close to matching up.

I think you are wasting your time and destroying a nice 12 cylinder manifold.

 

[gaboonviper85]

Why would you destroy such a thing! Hell pull the motor and put it in the supra!!!!!

 

[kamikazemkiii]

i have doubts and i dont wanna waste my time if its not gonna work at all. but if theres a way im tempted to try it

im pretty sure its getting close to the crushing date so if its gone its gone

 

[gaboonviper85]

Pull the motor and sell it...then buy a good ffim from suprasport or RonR

 

[kamikazemkiii]

the motors beat up pretty bad those piks were from photobucket so ppl could see what the hell i was talking about

ay tyler u gettin rid of one of those radiators?

 

[ma71supraturbo]

The runner spacing is wrong, the runner shape is wrong, the plenum was designed for a 2.7 liter NA, etc...

 

[kamikazemkiii]

thanx

 

[A. Jay]

Pull the motor and sell it...then buy a good ffim from suprasport or RonR

I was thinking that too, but unless the back end is crushed from some accident, it's possible that it's there because it doesn't run.

 

[gofastgeorge]

The runner spacing is wrong, the runner shape is wrong, the plenum was designed for a 2.7 liter NA, etc...

Not to mention that the runners are probably smaller than the stock 7M runners.

 

[Supra28]

Seems like you would have to do quite a bit of work to complete this. IF you decide to do so, I would love to see finished results. :icon_bigg

 

[supra90turbo]

Yeah you should totally do it, but leave the plenum as is.
bmw themed 7m. haha