Natalya has a 1JZ! (56K Go Home)
- Thread starter BlackMKIII
- Start date
Hmmm...That's pretty quiet for an RFL...even without a load on the engine...
The one on the 7M i was driving was INSANELY loud at the slightest amount of boost.
The one on the 7M i was driving was INSANELY loud at the slightest amount of boost.
On a 1jz the stock bov port is only about 3/4" id, it would be louder if it was installed closer to the intake manifold with a bigger flange.
bigaaron said:
I pretty much just put it on because:
a) It increases the bling factor of my engine bay
sarcasmb) It will be helpful when I get around to turning up the boost
c) It was cheap ($60) ::w00t::
I also put the silencer back in the RS*R today, because that thing was too fucking loud. I'll take it back out for dyno purposes, but I can't deal with the intense droning anymore. The car only makes about 10 PSI now, which SUCKS, but it sounds like a JET in the cabin. I also like to hear my nice new BOV. :biglaugh:
Last edited:
Hey, my Soup makes 10psi at 2800. There's nothin wrong with 10psi, and when are you goin to be coming up>?
Just had to buy new tires yesterday. Couldn't get ANY traction in this rain. Also, the right front had a screw in it.
That's okay, since Kumho is discontinuing the Ecsta ASX, I got them on the cheap.
That's okay, since Kumho is discontinuing the Ecsta ASX, I got them on the cheap.
New interior view!
Thanks to Kyle for providing the pre-cut trim panel and TT-1 harness. It looks great! Almost, dare I say, OEM?
Also, I changed out the Boost meter for a Vac/Boost gauge. It was free, too.
Thanks to Kyle for providing the pre-cut trim panel and TT-1 harness. It looks great! Almost, dare I say, OEM?
Also, I changed out the Boost meter for a Vac/Boost gauge. It was free, too.
Ace: I got the Momo before I picked the car up from Driftmotion
Kyle: It's being put to good use.
The roads have dried up, so I tried out the turbo timer's 1/4 mile estimator, here's what I got:
And that's only at 10 PSI! :biglaugh: Silencer in, NO tune, and with some wheel spin at 6K. I'm happy today.
Kyle: It's being put to good use.
The roads have dried up, so I tried out the turbo timer's 1/4 mile estimator, here's what I got:
And that's only at 10 PSI! :biglaugh: Silencer in, NO tune, and with some wheel spin at 6K. I'm happy today.
What momo wheel is that? I have been looking at several and kinda like that one. And how much was it, if you don't mind me asking?
Chris
Chris