My Black 91 Project

[Grandavi]

Are those molding prices interior or exterior?

 

[cruzian7m]

looking good and i think dave is bad luck hes not allowed by my car anymore and i wont drive near him lmao

think his specs were the same or close to my old wheels (think different tire size) and his car helped with my decision on the tein ss coilovers
something like rim-18x9.5+35 all 4 wheels i had 275x35 all around but i think hes running something different but im close

and part numbers and pricing for the front windshield molding and hatch moldings

windshield:
75531-14150 $39.62
75533-14170 $27.46
75534-14140 $27.46

hatch:
75571-14190 $72.39
75573-14202 $64.86
75575-14170 $83.46
75574-14172 $64.86
(kind of expensive i remember i had the hatch ones done when mine was in for paint back in like 06)

pretty sure he gave them to me in my pricing since i said if he wants them i'll be back tomorrow

LOL! wasn't my fault brandon.....I was just as pissed as chris! I'm scared to drive mines when it's finished...oh an chris WILL! drive my car when it done....although it won't be as nice as his is.

 

[BrandonW]

Are those molding prices interior or exterior?

exterior for around the windshield and rear hatch glass

LOL! wasn't my fault brandon.....I was just as pissed as chris! I'm scared to drive mines when it's finished...oh an chris WILL! drive my car when it done....although it won't be as nice as his is.

haha im j/k

 

[Grandavi]

If that comes with clips ... Where do I order?

 

[suprarx7nut]

Oddly enough I just priced out those moldings too. Champion has similar pricing.

Grandavi, no clips but they're not expensive.

Sent from my Galaxy Nexus using Tapatalk 2

 

[Grandavi]

I thought the OEM exterior windshield trim was obsolete. I would love to replace the windshield and hatch trim. Are the clips something that are kinda "standard" that you can get at any windshield shop?

 

[suprarx7nut]

I thought the OEM exterior windshield trim was obsolete. I would love to replace the windshield and hatch trim. Are the clips something that are kinda "standard" that you can get at any windshield shop?

I believe the clips are available through toyota still. Maybe I'm wrong though?

Sent from my Galaxy Nexus using Tapatalk 2

 

[Grandavi]

So.. final question.. who is carrying the windshield and hatch trim? I think those prices are decent. (for Toyota OEM)

 

[Beals]

So.. final question.. who is carrying the windshield and hatch trim? I think those prices are decent. (for Toyota OEM)

I think champion/jay marks toyota on the vendor list here is who he was referring too. Might have to order it across the border doubt canada would have it.

 

[Grandavi]

great.. gonna go check availability..


btw.. the link on these forums is dead... should be: http://www.supraforums.com/forum/forumdisplay.php?99-Champion-Jay-Marks-Toyota

 

[BrandonW]

that's the pricing my local dealership gave me which for me is usually less then the other two mentioned and i replaced my hatch trim back in like 2007

when I asked for the pricing I also asked for them to check if they were still available and they are at least for now

 

[supra1008]

wow you really do work fast... nice tein's btw can't wait to see the final finish. bodykit or stock? I would throw down some coin for a kit if the paint was free

edit: btw what's in your gauge pillar? wideband and oil pressure?

Just AEM wideband and Autometer mech boost/vac guage which I've actually been wanting to change.

Specs on wheels/tires. I like the looks of those.

This would be a great read for someone planning on buying/building a Supra for a peek at what you might find. Love the fact its also a 91.. I see so few of those.

They are TSW thruxtons 18x10 in the back and 18x9.5 in the fronts. Iirc, they are 35+ all around. The fronts have Bridgestone Potenza RE040's i believe. Love these tires!! They handle amazing even in the rain and not too bad in the snow. The backs are old as fk Michelin PS2's which I need to replace very soon!

 

[supra1008]

looking good and i think dave is bad luck hes not allowed by my car anymore and i wont drive near him lmao

think his specs were the same or close to my old wheels (think different tire size) and his car helped with my decision on the tein ss coilovers
something like rim-18x9.5+35 all 4 wheels i had 275x35 all around but i think hes running something different but im close

and part numbers and pricing for the front windshield molding and hatch moldings

windshield:
75531-14150 $39.62
75533-14170 $27.46
75534-14140 $27.46

hatch:
75571-14190 $72.39
75573-14202 $64.86
75575-14170 $83.46
75574-14172 $64.86
(kind of expensive i remember i had the hatch ones done when mine was in for paint back in like 06)

pretty sure he gave them to me in my pricing since i said if he wants them i'll be back tomorrow

Now that you mention it, I think he is bad luck Freds car he was involved in. Then again with this. Becoming too much of a coincidence! lolol. jk Dave!

Yea I was pissed!!! I got out and fkin pounded my fists on my hood! Hurt for a bit afterwards after the adrenalin stopped pumping. No idea what this old guy was thinking! Something was definetely wrong with him cause even the cop was having a hard time talking to him...surprised she didn't do a sobriety test on him....idk.

As for the molding, I think I'll wait till the car is done. I don't think I need ALL of them. I just wanna make sure before I have you order them. Thanks!

 

[cruzian7m]

I see you guys got jokes!.....lmaol! I hope i don't mess mines up when it eventually comes out.

 

[supra1008]

I see you guys got jokes!.....lmaol! I hope i don't mess mines up when it eventually comes out.

I can't wait! The mkiii's are dropping like flies in Philly! We need another nice running one in Philly again. You and adrian need to get your cars running. I'm actually supposed to go to his house on saturday I think to help him with his car.

 

[supra1008]

So... more pics to update....

Only thing mechanically damaged


front end straightened...

 

[supra1008]

painted and cleared and now wet sanding and buffing.














almost!!!

 

[cruzian7m]

DAMN! looking good chris! I see you got him to install the turbo A duct. I got a ways to go on my swap. I want to replace my alternator for a higher amperage unit, i heard the v8 tundra unit is the way to go. I'm still waiting on my turbo and ecu.

 

[cruzian7m]

I also gotta figure out the heater hose routing situation, order a turbo A duct...install it and paint the bumper.

 

[supra1008]

DAMN! looking good chris! I see you got him to install the turbo A duct. I got a ways to go on my swap. I want to replace my alternator for a higher amperage unit, i heard the v8 tundra unit is the way to go. I'm still waiting on my turbo and ecu.

v8 tundra? what year? What are the amp ratings on those? plug n play?