my 89 supra build body, paint, mech, interior!!!
- Thread starter Slow_Sc3
- Start date
sorry with this weather and work iv been super bussy.
I got a complete good 2jz short block for the car also got two external wastegates.. i should be pulling the motor out soon to build it im looking at getting a 80mm turbo and im going to weld up a pretty cool custom intake manifold to go with it.. iv also powder coated the valve covers a wet black and gotten a carbon hood, side louvers and cooling plate and installed tein hr coilovers.
I got a complete good 2jz short block for the car also got two external wastegates.. i should be pulling the motor out soon to build it im looking at getting a 80mm turbo and im going to weld up a pretty cool custom intake manifold to go with it.. iv also powder coated the valve covers a wet black and gotten a carbon hood, side louvers and cooling plate and installed tein hr coilovers.
Slow_Sc3;1454988 said:
my candy red doesnt look like your candy red for some reason....
Is that picture taken after it was put on a shaker or stirred? looks like its a metalic red or has alot of pearl in it from the pics. gl with the build and hope it turns out nice!
^ stir the paint up in the can really well, then thats when you will notice 
after days of shipping it in the box without stirring or mixing it up causes chemicals in the paint to separate, so mix it well, ESPECIALLY before mixing the paint and the reducers, that is a critical part of paint to come out correctly!
after days of shipping it in the box without stirring or mixing it up causes chemicals in the paint to separate, so mix it well, ESPECIALLY before mixing the paint and the reducers, that is a critical part of paint to come out correctly!