i am currently swapping a 7mgte into my 89 cressida. i have everything ready to go , just one thing still puzzles me. i am not sure if i can use a stock replacement ge cressida pump and pickup, or cut and weld the one i have in the gte currently. my cressida like every other cressida is a front sump setup and the supra is a rear sump. i have spent hours reading other people comments on this subject, but they all seem to be misleading. some say the ge one will starve the bearings while others say there is no difference beside being a front sump setup. i have even gone to the lengths of taking both apart and comparing the two. the internals of both seem the same , but i would rather know 100% for sure before attempting the ge pump in my gte. and fyi the pickups are not interchangable ive already tried that. if anyone has any information that would be helpful in figuring this out it would be much appreciated . you can email me at jeremycarter44@gmail.com or message me back here thanks