here i will post what i consider the best 7M we can build for track use
every day i miss that egine
it dide and the reason was a piece of paper into the engine bloked one of the oil lines ( thanks to a one of my friends who only want to help)
the list of things are:
7Mgte block decked to have the piston head just to the top edge of the cylinder walls
1.2 metal head gasket but it depends of the compression you like to have or the combustion chamber modification
cylinder head ported with a set of 0,5 oversized valves and combustion chamber modded like the 2JZ have
BC valve spring set and titanium retainers
BC 272 cams
set of adjustable cam polleys
Pauter conrods
Wiseco Pistons
racing set of crank and conrod bearings
clutch and flywheel at your election but i like the carbon disc clutch kit from Tilton.
custom dry sump system with vaacum controler and VPC valve
ARP studs
Water methanol system
programable ECU
900 cc injector minimum
bosch 044 fuel pump
good FPR
Garrett gGTX3582BB turbo or similar
OBX exhaust manifold is sufficient but the faces must be machined
free flow exhaust
ATI superdamper
Truck coils
here is the photos
electric steering pump attached to the block
it can be lower than a standar heigh
every day i miss that egine
it dide and the reason was a piece of paper into the engine bloked one of the oil lines ( thanks to a one of my friends who only want to help)
the list of things are:
7Mgte block decked to have the piston head just to the top edge of the cylinder walls
1.2 metal head gasket but it depends of the compression you like to have or the combustion chamber modification
cylinder head ported with a set of 0,5 oversized valves and combustion chamber modded like the 2JZ have
BC valve spring set and titanium retainers
BC 272 cams
set of adjustable cam polleys
Pauter conrods
Wiseco Pistons
racing set of crank and conrod bearings
clutch and flywheel at your election but i like the carbon disc clutch kit from Tilton.
custom dry sump system with vaacum controler and VPC valve
ARP studs
Water methanol system
programable ECU
900 cc injector minimum
bosch 044 fuel pump
good FPR
Garrett gGTX3582BB turbo or similar
OBX exhaust manifold is sufficient but the faces must be machined
free flow exhaust
ATI superdamper
Truck coils
here is the photos
electric steering pump attached to the block
it can be lower than a standar heigh
Last edited: