I bought this engine for my 90 turbo. The car had 265 k a blown hg a turbo with a blown oil seal and tons of shaft play. When I pulled the head it bent like a banana. it needed a good bit of machine work and I needed a second engine for another project at a later date (why I was looking for a supra "parts" car in the first place) so I figured i'd freshen this one up here and there. I went and picked up a used jdm engine to get the car rolling, ordered the parts I needed, clutch, gaskets hoses ect. The weekend before I was to put the engine in I found 4 valves siezed open (intake side) also some very light surface rust on the crankcase. The guy I bought the engine from was not very helpfull.
pulling the engine apart just now and found a f*cking crack in the block between cyl4-5 on the exhaust side headbolt hole. I sent the importer a picture of the engine and called him, he said he's busy and will call back but I know he going to try and screw me on this with some we don't warranty cracked blocks cause it run B.S.
Sorry, but I'm just so pissed right now
pulling the engine apart just now and found a f*cking crack in the block between cyl4-5 on the exhaust side headbolt hole. I sent the importer a picture of the engine and called him, he said he's busy and will call back but I know he going to try and screw me on this with some we don't warranty cracked blocks cause it run B.S.
Sorry, but I'm just so pissed right now